libertas 8385 firmware

[Дымченко Богдан Геннадиевич]

But it helps. Now we have firmware that works with libertas
(gspi8385.bin,gspi8385_hlp.bin)
On pudn were source of driver for 2.4 kernel, but in header file there was
structure of binary files.
We can send firmware to you, if you need.
Now it is libertas fw 5.0.10p0, cap 0x00000303
We don't have test it fully yet, but it looks like fine firmware. AP scan
working.

2010/7/13 Marek Vasut <marek.vasut at gmail.com>

> Dne Út 13. července 2010 10:31:52 Дымченко Богдан Геннадиевич napsal(a):
> > Thanks for your response.
> > I think that libertas developers can know where is it. Because there is
> > firmware for cf and sd cards, but not for GSPI.
> > But we found sources on pudn, and there was driver that have this binary,
> > so that's all. Wireless card now working.
> > Thanks.
>
> Once again ... please keep the CC.
>
> Pudn isn't something I'd believe can help.
>
> Holger will likely know where the firmware is.
> >
> > 2010/7/13 Marek Vasut <marek.vasut at gmail.com>
> >
> > > Dne Út 13. července 2010 05:08:29 Дымченко Богдан Геннадиевич
> napsal(a):
> > > > But why there is a code about SPI in libertas source code and
> > > > gspi8385_hlp.bin?
> > > > if_spi.c:73
> > > > { .chip_id = 0x04, .name = 8385 },
> > >
> > > Please keep ML and interested parties CCed. The gspi8385_hlp.bin is a
> > > name of
> > > the helper firmware binary (that's like a bootloader for the card, like
> > > you have
> > > GRUB or lilo on PC ;-) )
> > >
> > > > if_spi.c:905
> > > > MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
> > > > MODULE_FIRMWARE("libertas/gspi8385.bin");
> > >
> > > The other one is the real firmware that runs on the device (like linux
> > > kernel on
> > > your PC :) )
> > >
> > > > we just need bin files, because there is Marvell 8385 wireless
> adapter,
> > > > worked over SPI, and we try to run it under Linux.
> > >
> > > Yes I know, and you don't know where to get them? Maybe ask Marvell ?
> > >
> > > > Thank you.
> > > > 2010/7/13 Marek Vasut <marek.vasut at gmail.com>
> > > >
> > > > > Dne Ne 11. července 2010 00:03:47 Дымченко Богдан Геннадиевич
> > >
> > > napsal(a):
> > > > > > Hi. I have a 8385 marvell wireless chip. But there is no firmware
> > > > > > for it, because it use gspi. Can you tell how i can get it? Here
> > > > > > is log.
> > >
> > > [
> > >
> > > > > > 229.402000] libertas_spi spi3.0: 13000000 Hz actual, PIO
> > > > > > [ 229.434596] libertas_spi spi3.0: setup mode 0, 16 bits/w,
> > > > > > 13000000
> > >
> > > Hz
> > >
> > > > > max
> > > > >
> > > > > > --> 0
> > > > > > [ 229.453868] libertas_spi spi3.0: firmware: requesting
> > > > > > libertas/gspi8385_hlp.bin
> > > > > > [ 289.725731] libertas: request_firmware failed with err = -2
> > > > > > [ 289.743805] libertas: failed to load helper firmware (err=-2)
> > > > > > [ 289.761834] libertas_spi: probe of spi3.0 failed with error -2
> > > > > > [ 296.280690] lib80211: common routines for IEEE802.11 drivers
> > > > > > [ 296.298452] lib80211_crypt: registered algorithm 'NULL'
> > > > > > [ 314.532373] libertas: Unknown symbol mutex_lock (err 0)
> > > > > > [ 314.750825] libertas_spi: Libertas SPI driver
> > > > > >
> > > > > > Thank you.
> > > > >
> > > > > I dunno about SPI, but there was for cf8385. Holger CCed.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/libertas-dev/attachments/20100713/3ee30f7d/attachment-0001.html>