Marvell 8686 sdio in ARM11 linux2.6.24.2

[tommy]

hi,all!My ARM11 met a marvell8686 problem!It is similiar with
http://lists.infradead.org/pipermail/libertas-dev/2008-June/001721.html!

following is my debug!

1:
root at localhost:/root# 

** (nm-applet:828): WARNING **: <WARN>  nm_gconf_get_keyring_items():
key: /system/networking/private-data/k


Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 MHz)
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 10 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 8 value 0x0 - Association request to the driver failed
Associated with 00:1c:b0:91:6e:8c
WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP
GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed (auth)
[id=0 id_str=]
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.

2:root at localhost:/root# ping -s 5000 210.28.95.230
PING 210.28.95.230 (210.28.95.230): 5000 data bytes
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
5008 bytes from 210.28.95.230: seq=0 ttl=48 time=86.571 ms
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
5008 bytes from 210.28.95.230: seq=1 ttl=48 time=89.089 ms
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
5008 bytes from 210.28.95.230: seq=2 ttl=48 time=85.210 ms
mmc1: Got command interrupt 0x00008000 even though no command operation
was in progress.
NETDEV WATCHDOG: eth3: transmit timed out


Someone can posted some patch for that?My bsp is 2.6.24 libertas driver
for marvell8686!

Thanks !