[PATCH] libertas: set mac control synchronously during init
Daniel Drake
dsd at laptop.org
Tue Sep 11 11:38:11 EDT 2012
CMD_MAC_CONTROL is currently sent async to the firmware, and is sent
from the lbs_setup_firmware() path during device init.
This means that device init can complete with commands pending, and
the if_sdio driver will sometimes power down the device (after init)
with this command still pending.
This was causing an occasional spurious command timeout after init,
leading to a device reset.
Fix this by making CMD_MAC_CONTROL synchronous when called from the
lbs_setup_firmware() path.
Signed-off-by: Daniel Drake <dsd at laptop.org>
---
drivers/net/wireless/libertas/cmd.c | 16 ++++++++++++++++
drivers/net/wireless/libertas/cmd.h | 1 +
drivers/net/wireless/libertas/main.c | 4 +++-
3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 26e6832..aaa2973 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1159,6 +1159,22 @@ void lbs_set_mac_control(struct lbs_private *priv)
lbs_deb_leave(LBS_DEB_CMD);
}
+int lbs_set_mac_control_sync(struct lbs_private *priv)
+{
+ struct cmd_ds_mac_control cmd;
+ int ret = 0;
+
+ lbs_deb_enter(LBS_DEB_CMD);
+
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(priv->mac_control);
+ cmd.reserved = 0;
+ ret = lbs_cmd_with_response(priv, CMD_MAC_CONTROL, &cmd);
+
+ lbs_deb_leave(LBS_DEB_CMD);
+ return ret;
+}
+
/**
* lbs_allocate_cmd_buffer - allocates the command buffer and links
* it to command free queue
diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h
index ab07608..4279e8a 100644
--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -96,6 +96,7 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv);
int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on);
void lbs_set_mac_control(struct lbs_private *priv);
+int lbs_set_mac_control_sync(struct lbs_private *priv);
int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
s16 *maxlevel);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index fe1ea43..0c02f04 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -682,8 +682,10 @@ static int lbs_setup_firmware(struct lbs_private *priv)
/* Send cmd to FW to enable 11D function */
ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_11D_ENABLE, 1);
+ if (ret)
+ goto done;
- lbs_set_mac_control(priv);
+ ret = lbs_set_mac_control_sync(priv);
done:
lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
return ret;
--
1.7.11.4
More information about the libertas-dev
mailing list