[PATCH 6/9] x86: OLPC: switch over to using new EC driver on x86
Andres Salomon
dilinger at queued.net
Thu Jul 19 00:36:05 EDT 2012
Damnit, my mailer mangled the resend. Okay, 3rd time's a charm..
(sorry for the noise!)
On Wed, 18 Jul 2012 21:28:27 -0700
Andres Salomon <dilinger at queued.net> wrote:
> This uses the new EC driver framework in drivers/platform/olpc. The
> XO-1 and XO-1.5-specific code is still in arch/x86, but the generic
> stuff (including a new workqueue; no more running EC commands with
> IRQs disabled!) can be shared with other architectures.
>
> Signed-off-by: Andres Salomon <dilinger at queued.net>
> ---
> arch/x86/include/asm/olpc.h | 5 ---
> arch/x86/platform/olpc/olpc.c | 53
> ++++++++++++++++++++-------------------
> drivers/platform/olpc/olpc-ec.c | 5 --- 3 files changed, 27
> insertions(+), 36 deletions(-)
>
> diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
> index 5b28f3e..72f9adf6 100644
> --- a/arch/x86/include/asm/olpc.h
> +++ b/arch/x86/include/asm/olpc.h
> @@ -100,11 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value);
>
> extern int pci_olpc_init(void);
>
> -/* EC related functions */
> -
> -extern int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf,
> - size_t inlen, unsigned char *outbuf, size_t outlen);
> -
> /* SCI source values */
>
> #define EC_SCI_SRC_EMPTY 0x00
> diff --git a/arch/x86/platform/olpc/olpc.c
> b/arch/x86/platform/olpc/olpc.c index a3fa180..4590096 100644
> --- a/arch/x86/platform/olpc/olpc.c
> +++ b/arch/x86/platform/olpc/olpc.c
> @@ -14,7 +14,6 @@
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/delay.h>
> -#include <linux/spinlock.h>
> #include <linux/io.h>
> #include <linux/string.h>
> #include <linux/platform_device.h>
> @@ -32,8 +31,6 @@
> struct olpc_platform_t olpc_platform_info;
> EXPORT_SYMBOL_GPL(olpc_platform_info);
>
> -static DEFINE_SPINLOCK(ec_lock);
> -
> /* debugfs interface to EC commands */
> #define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
> #define EC_MAX_CMD_REPLY (8)
> @@ -126,16 +123,13 @@ static int __wait_on_obf(unsigned int line,
> unsigned int port, int desired)
> * <http://wiki.laptop.org/go/Ec_specification>. Unfortunately,
> while
> * OpenFirmware's source is available, the EC's is not.
> */
> -int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, size_t
> inlen,
> - unsigned char *outbuf, size_t outlen)
> +static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8
> *outbuf,
> + size_t outlen, void *arg)
> {
> - unsigned long flags;
> int ret = -EIO;
> int i;
> int restarts = 0;
>
> - spin_lock_irqsave(&ec_lock, flags);
> -
> /* Clear OBF */
> for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
> inb(0x68);
> @@ -199,10 +193,8 @@ restart:
>
> ret = 0;
> err:
> - spin_unlock_irqrestore(&ec_lock, flags);
> return ret;
> }
> -EXPORT_SYMBOL_GPL(olpc_ec_cmd_x86);
>
> void olpc_ec_wakeup_set(u16 value)
> {
> @@ -366,7 +358,7 @@ static void setup_debugfs(void)
> &ec_debugfs_genops);
> }
>
> -static int olpc_ec_suspend(void)
> +static int olpc_ec_suspend(struct platform_device *pdev)
> {
> return olpc_ec_mask_write(ec_wakeup_mask);
> }
> @@ -425,8 +417,28 @@ static int __init add_xo1_platform_devices(void)
> return 0;
> }
>
> -static struct syscore_ops olpc_syscore_ops = {
> +static int olpc_xo1_ec_probe(struct platform_device *pdev)
> +{
> + /* get the EC revision */
> + olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
> + (unsigned char *) &olpc_platform_info.ecver,
> 1); +
> + /* EC version 0x5f adds support for wide SCI mask */
> + if (olpc_platform_info.ecver >= 0x5f)
> + olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
> +
> + pr_info("OLPC board revision %s%X (EC=%x)\n",
> + ((olpc_platform_info.boardrev & 0xf) < 8) ?
> "pre" : "",
> + olpc_platform_info.boardrev >> 4,
> + olpc_platform_info.ecver);
> +
> + return 0;
> +}
> +
> +static struct olpc_ec_driver ec_xo1_driver = {
> .suspend = olpc_ec_suspend,
> + .probe = olpc_xo1_ec_probe,
> + .ec_cmd = olpc_xo1_ec_cmd,
> };
>
> static int __init olpc_init(void)
> @@ -436,16 +448,14 @@ static int __init olpc_init(void)
> if (!olpc_ofw_present() || !platform_detect())
> return 0;
>
> - spin_lock_init(&ec_lock);
> + /* register the XO-1 and 1.5-specific EC handler */
> + olpc_ec_driver_register(&ec_xo1_driver, NULL);
> + platform_device_register_simple("olpc-ec", -1, NULL, 0);
>
> /* assume B1 and above models always have a DCON */
> if (olpc_board_at_least(olpc_board(0xb1)))
> olpc_platform_info.flags |= OLPC_F_DCON;
>
> - /* get the EC revision */
> - olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
> - (unsigned char *) &olpc_platform_info.ecver,
> 1); -
> #ifdef CONFIG_PCI_OLPC
> /* If the VSA exists let it emulate PCI, if not emulate in
> kernel.
> * XO-1 only. */
> @@ -453,14 +463,6 @@ static int __init olpc_init(void)
> !cs5535_has_vsa2())
> x86_init.pci.arch_init = pci_olpc_init;
> #endif
> - /* EC version 0x5f adds support for wide SCI mask */
> - if (olpc_platform_info.ecver >= 0x5f)
> - olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
> -
> - printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
> - ((olpc_platform_info.boardrev & 0xf) < 8) ?
> "pre" : "",
> - olpc_platform_info.boardrev >> 4,
> - olpc_platform_info.ecver);
>
> if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /*
> XO-1 */ r = add_xo1_platform_devices();
> @@ -468,7 +470,6 @@ static int __init olpc_init(void)
> return r;
> }
>
> - register_syscore_ops(&olpc_syscore_ops);
> setup_debugfs();
>
> return 0;
> diff --git a/drivers/platform/olpc/olpc-ec.c
> b/drivers/platform/olpc/olpc-ec.c index cfba41f..a3d32c2 100644
> --- a/drivers/platform/olpc/olpc-ec.c
> +++ b/drivers/platform/olpc/olpc-ec.c
> @@ -113,11 +113,6 @@ int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen,
> u8 *outbuf, size_t outlen) struct olpc_ec_priv *ec = ec_priv;
> struct ec_cmd_desc desc;
>
> - /* XXX: this will be removed in later patches */
> - /* Are we using old-style callers? */
> - if (!ec_driver || !ec_driver->ec_cmd)
> - return olpc_ec_cmd_x86(cmd, inbuf, inlen, outbuf,
> outlen); -
> /* Ensure a driver and ec hook have been registered */
> if (WARN_ON(!ec_driver || !ec_driver->ec_cmd))
> return -ENODEV;
More information about the libertas-dev
mailing list