WPA can connect, but nothing to do

[zamek]

Hi All,

I'd continue the investigation and I found these:

module uap8xxx: successfully initialized, I can start stop working with 
uaputl, can set wpa keys and mode too.
I can connect ot it from another pc, but these are individual functions 
of 8688 chip.

Unfortunately uap8xxx module doesn't register itself into the wireless 
devices list. (iwconfig cannot shows it, only ifconfig can shows)

# cat /proc/net/dev

Inter-|   Receive                                                |  Transmit
  face |bytes    packets errs drop fifo frame compressed 
multicast|bytes    packets errs drop fifo colls carrier compressed
     lo:   11032     100    0    0    0     0          0         0    
11032     100    0    0    0     0       0          0
   can0:       0       0    0    0    0     0          0         
0        0       0    0    0    0     0       0          0
   can1:       0       0    0    0    0     0          0         
0        0       0    0    0    0     0       0          0
   eth0: 45654236  301701    0    0    0     0          0         0 
43925427  299342    0    0    0     0       0          0
   sit0:       0       0    0    0    0     0          0         
0        0       0    0    0    0     0       0          0
   uap0:  346531    6929    0    0    0     0          0         
0        0       0    0    0    0     0       0          0

and cannot shows in wireless:

# cat /proc/net/wireless
Inter-| sta-|   Quality           |   Discarded packets                 
| Missed | WE
  face | tus | link level noise |  nwid  crypt   frag  retry   misc | 
beacon | 22

When I try to ping this interface from another pc, after I connected to 
it received bytes of uap0 increments, but there is no answer, because 
kernel doesn't know to existing wireless interface of uap0.
Of course transmitted bytes is 0 because of it.

My question: what is the correct method to register a new device to 
wireless devices?

-- 
  thx,
----------------------------------
Zoltan Zidarics programmer
PTE-PMMFK H-7621 Pecs, Boszorkany u. 2. Hungary
E-Mail: zamek at vili.pmmf.hu
----------------------------------