[PATCH 2/4] libertas: mesh: misc cleanup
Dan Williams
dcbw at redhat.com
Wed Jul 20 12:04:47 EDT 2011
On Sun, 2011-07-17 at 18:03 +0100, Daniel Drake wrote:
> Remove unused blindlist code.
>
> Mark a few items const and static where possible. Involved some
> code re-ordering, but no code changes.
>
> Signed-off-by: Daniel Drake <dsd at laptop.org>
Acked-by: Dan Williams <dcbw at redhat.com>
> ---
> drivers/net/wireless/libertas/mesh.c | 1313 +++++++++++++++-------------------
> drivers/net/wireless/libertas/mesh.h | 24 -
> 2 files changed, 562 insertions(+), 775 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
> index 7969d10..a20419d 100644
> --- a/drivers/net/wireless/libertas/mesh.c
> +++ b/drivers/net/wireless/libertas/mesh.c
> @@ -15,6 +15,121 @@
> #include "cmd.h"
>
>
> +static int lbs_add_mesh(struct lbs_private *priv);
> +
> +/***************************************************************************
> + * Mesh command handling
> + */
> +
> +static int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
> + struct cmd_ds_mesh_access *cmd)
> +{
> + int ret;
> +
> + lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
> +
> + cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS);
> + cmd->hdr.size = cpu_to_le16(sizeof(*cmd));
> + cmd->hdr.result = 0;
> +
> + cmd->action = cpu_to_le16(cmd_action);
> +
> + ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd);
> +
> + lbs_deb_leave(LBS_DEB_CMD);
> + return ret;
> +}
> +
> +static int __lbs_mesh_config_send(struct lbs_private *priv,
> + struct cmd_ds_mesh_config *cmd,
> + uint16_t action, uint16_t type)
> +{
> + int ret;
> + u16 command = CMD_MESH_CONFIG_OLD;
> +
> + lbs_deb_enter(LBS_DEB_CMD);
> +
> + /*
> + * Command id is 0xac for v10 FW along with mesh interface
> + * id in bits 14-13-12.
> + */
> + if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
> + command = CMD_MESH_CONFIG |
> + (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
> +
> + cmd->hdr.command = cpu_to_le16(command);
> + cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
> + cmd->hdr.result = 0;
> +
> + cmd->type = cpu_to_le16(type);
> + cmd->action = cpu_to_le16(action);
> +
> + ret = lbs_cmd_with_response(priv, command, cmd);
> +
> + lbs_deb_leave(LBS_DEB_CMD);
> + return ret;
> +}
> +
> +static int lbs_mesh_config_send(struct lbs_private *priv,
> + struct cmd_ds_mesh_config *cmd,
> + uint16_t action, uint16_t type)
> +{
> + int ret;
> +
> + if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
> + return -EOPNOTSUPP;
> +
> + ret = __lbs_mesh_config_send(priv, cmd, action, type);
> + return ret;
> +}
> +
> +/* This function is the CMD_MESH_CONFIG legacy function. It only handles the
> + * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG
> + * are all handled by preparing a struct cmd_ds_mesh_config and passing it to
> + * lbs_mesh_config_send.
> + */
> +static int lbs_mesh_config(struct lbs_private *priv, uint16_t action,
> + uint16_t chan)
> +{
> + struct cmd_ds_mesh_config cmd;
> + struct mrvl_meshie *ie;
> + DECLARE_SSID_BUF(ssid);
> +
> + memset(&cmd, 0, sizeof(cmd));
> + cmd.channel = cpu_to_le16(chan);
> + ie = (struct mrvl_meshie *)cmd.data;
> +
> + switch (action) {
> + case CMD_ACT_MESH_CONFIG_START:
> + ie->id = WLAN_EID_GENERIC;
> + ie->val.oui[0] = 0x00;
> + ie->val.oui[1] = 0x50;
> + ie->val.oui[2] = 0x43;
> + ie->val.type = MARVELL_MESH_IE_TYPE;
> + ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
> + ie->val.version = MARVELL_MESH_IE_VERSION;
> + ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
> + ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
> + ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
> + ie->val.mesh_id_len = priv->mesh_ssid_len;
> + memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
> + ie->len = sizeof(struct mrvl_meshie_val) -
> + IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
> + cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
> + break;
> + case CMD_ACT_MESH_CONFIG_STOP:
> + break;
> + default:
> + return -1;
> + }
> + lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
> + action, priv->mesh_tlv, chan,
> + print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len));
> +
> + return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
> +}
> +
> +
> /***************************************************************************
> * Mesh sysfs support
> */
> @@ -200,671 +315,100 @@ static struct attribute *lbs_mesh_sysfs_entries[] = {
> NULL,
> };
>
> -static struct attribute_group lbs_mesh_attr_group = {
> +static const struct attribute_group lbs_mesh_attr_group = {
> .attrs = lbs_mesh_sysfs_entries,
> };
>
>
> -
> /***************************************************************************
> - * Initializing and starting, stopping mesh
> + * Persistent configuration support
> */
>
> -/*
> - * Check mesh FW version and appropriately send the mesh start
> - * command
> - */
> -int lbs_init_mesh(struct lbs_private *priv)
> +static int mesh_get_default_parameters(struct device *dev,
> + struct mrvl_mesh_defaults *defs)
> {
> - struct net_device *dev = priv->dev;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_MESH);
> -
> - priv->mesh_connect_status = LBS_DISCONNECTED;
> -
> - /* Determine mesh_fw_ver from fwrelease and fwcapinfo */
> - /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
> - /* 5.110.22 have mesh command with 0xa3 command id */
> - /* 10.0.0.p0 FW brings in mesh config command with different id */
> - /* Check FW version MSB and initialize mesh_fw_ver */
> - if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) {
> - /* Enable mesh, if supported, and work out which TLV it uses.
> - 0x100 + 291 is an unofficial value used in 5.110.20.pXX
> - 0x100 + 37 is the official value used in 5.110.21.pXX
> - but we check them in that order because 20.pXX doesn't
> - give an error -- it just silently fails. */
> + struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> + struct cmd_ds_mesh_config cmd;
> + int ret;
>
> - /* 5.110.20.pXX firmware will fail the command if the channel
> - doesn't match the existing channel. But only if the TLV
> - is correct. If the channel is wrong, _BOTH_ versions will
> - give an error to 0x100+291, and allow 0x100+37 to succeed.
> - It's just that 5.110.20.pXX will not have done anything
> - useful */
> + memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
> + ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET,
> + CMD_TYPE_MESH_GET_DEFAULTS);
>
> - priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
> - if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> - priv->channel)) {
> - priv->mesh_tlv = TLV_TYPE_MESH_ID;
> - if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> - priv->channel))
> - priv->mesh_tlv = 0;
> - }
> - } else
> - if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
> - (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) {
> - /* 10.0.0.pXX new firmwares should succeed with TLV
> - * 0x100+37; Do not invoke command with old TLV.
> - */
> - priv->mesh_tlv = TLV_TYPE_MESH_ID;
> - if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> - priv->channel))
> - priv->mesh_tlv = 0;
> - }
> + if (ret)
> + return -EOPNOTSUPP;
>
> + memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults));
>
> - if (priv->mesh_tlv) {
> - sprintf(priv->mesh_ssid, "mesh");
> - priv->mesh_ssid_len = 4;
> + return 0;
> +}
>
> - lbs_add_mesh(priv);
> +/**
> + * bootflag_get - Get function for sysfs attribute bootflag
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> + */
> +static ssize_t bootflag_get(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct mrvl_mesh_defaults defs;
> + int ret;
>
> - if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
> - netdev_err(dev, "cannot register lbs_mesh attribute\n");
> + ret = mesh_get_default_parameters(dev, &defs);
>
> - ret = 1;
> - }
> + if (ret)
> + return ret;
>
> - lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> - return ret;
> + return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
> }
>
> -
> -int lbs_deinit_mesh(struct lbs_private *priv)
> +/**
> + * bootflag_set - Set function for sysfs attribute bootflag
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> + */
> +static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> {
> - struct net_device *dev = priv->dev;
> - int ret = 0;
> + struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> + struct cmd_ds_mesh_config cmd;
> + uint32_t datum;
> + int ret;
>
> - lbs_deb_enter(LBS_DEB_MESH);
> + memset(&cmd, 0, sizeof(cmd));
> + ret = sscanf(buf, "%d", &datum);
> + if ((ret != 1) || (datum > 1))
> + return -EINVAL;
>
> - if (priv->mesh_tlv) {
> - device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
> - ret = 1;
> - }
> + *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
> + cmd.length = cpu_to_le16(sizeof(uint32_t));
> + ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> + CMD_TYPE_MESH_SET_BOOTFLAG);
> + if (ret)
> + return ret;
>
> - lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> - return ret;
> + return strlen(buf);
> }
>
> -
> /**
> - * lbs_mesh_stop - close the mshX interface
> - *
> - * @dev: A pointer to &net_device structure
> - * returns: 0
> + * boottime_get - Get function for sysfs attribute boottime
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> -static int lbs_mesh_stop(struct net_device *dev)
> +static ssize_t boottime_get(struct device *dev,
> + struct device_attribute *attr, char *buf)
> {
> - struct lbs_private *priv = dev->ml_priv;
> + struct mrvl_mesh_defaults defs;
> + int ret;
>
> - lbs_deb_enter(LBS_DEB_MESH);
> - spin_lock_irq(&priv->driver_lock);
> + ret = mesh_get_default_parameters(dev, &defs);
>
> - priv->mesh_open = 0;
> - priv->mesh_connect_status = LBS_DISCONNECTED;
> -
> - netif_stop_queue(dev);
> - netif_carrier_off(dev);
> -
> - spin_unlock_irq(&priv->driver_lock);
> -
> - schedule_work(&priv->mcast_work);
> -
> - lbs_deb_leave(LBS_DEB_MESH);
> - return 0;
> -}
> -
> -/**
> - * lbs_mesh_dev_open - open the mshX interface
> - *
> - * @dev: A pointer to &net_device structure
> - * returns: 0 or -EBUSY if monitor mode active
> - */
> -static int lbs_mesh_dev_open(struct net_device *dev)
> -{
> - struct lbs_private *priv = dev->ml_priv;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_NET);
> -
> - spin_lock_irq(&priv->driver_lock);
> -
> - if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
> - ret = -EBUSY;
> - goto out;
> - }
> -
> - priv->mesh_open = 1;
> - priv->mesh_connect_status = LBS_CONNECTED;
> - netif_carrier_on(dev);
> -
> - if (!priv->tx_pending_len)
> - netif_wake_queue(dev);
> - out:
> -
> - spin_unlock_irq(&priv->driver_lock);
> - lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
> - return ret;
> -}
> -
> -static const struct net_device_ops mesh_netdev_ops = {
> - .ndo_open = lbs_mesh_dev_open,
> - .ndo_stop = lbs_mesh_stop,
> - .ndo_start_xmit = lbs_hard_start_xmit,
> - .ndo_set_mac_address = lbs_set_mac_address,
> - .ndo_set_multicast_list = lbs_set_multicast_list,
> -};
> -
> -/**
> - * lbs_add_mesh - add mshX interface
> - *
> - * @priv: A pointer to the &struct lbs_private structure
> - * returns: 0 if successful, -X otherwise
> - */
> -int lbs_add_mesh(struct lbs_private *priv)
> -{
> - struct net_device *mesh_dev = NULL;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_MESH);
> -
> - /* Allocate a virtual mesh device */
> - mesh_dev = alloc_netdev(0, "msh%d", ether_setup);
> - if (!mesh_dev) {
> - lbs_deb_mesh("init mshX device failed\n");
> - ret = -ENOMEM;
> - goto done;
> - }
> - mesh_dev->ml_priv = priv;
> - priv->mesh_dev = mesh_dev;
> -
> - mesh_dev->netdev_ops = &mesh_netdev_ops;
> - mesh_dev->ethtool_ops = &lbs_ethtool_ops;
> - memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN);
> -
> - SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
> -
> - mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
> - /* Register virtual mesh interface */
> - ret = register_netdev(mesh_dev);
> - if (ret) {
> - pr_err("cannot register mshX virtual interface\n");
> - goto err_free;
> - }
> -
> - ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
> - if (ret)
> - goto err_unregister;
> -
> - lbs_persist_config_init(mesh_dev);
> -
> - /* Everything successful */
> - ret = 0;
> - goto done;
> -
> -err_unregister:
> - unregister_netdev(mesh_dev);
> -
> -err_free:
> - free_netdev(mesh_dev);
> -
> -done:
> - lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> - return ret;
> -}
> -
> -void lbs_remove_mesh(struct lbs_private *priv)
> -{
> - struct net_device *mesh_dev;
> -
> - mesh_dev = priv->mesh_dev;
> - if (!mesh_dev)
> - return;
> -
> - lbs_deb_enter(LBS_DEB_MESH);
> - netif_stop_queue(mesh_dev);
> - netif_carrier_off(mesh_dev);
> - sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
> - lbs_persist_config_remove(mesh_dev);
> - unregister_netdev(mesh_dev);
> - priv->mesh_dev = NULL;
> - free_netdev(mesh_dev);
> - lbs_deb_leave(LBS_DEB_MESH);
> -}
> -
> -
> -
> -/***************************************************************************
> - * Sending and receiving
> - */
> -struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
> - struct net_device *dev, struct rxpd *rxpd)
> -{
> - if (priv->mesh_dev) {
> - if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) {
> - if (rxpd->rx_control & RxPD_MESH_FRAME)
> - dev = priv->mesh_dev;
> - } else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) {
> - if (rxpd->u.bss.bss_num == MESH_IFACE_ID)
> - dev = priv->mesh_dev;
> - }
> - }
> - return dev;
> -}
> -
> -
> -void lbs_mesh_set_txpd(struct lbs_private *priv,
> - struct net_device *dev, struct txpd *txpd)
> -{
> - if (dev == priv->mesh_dev) {
> - if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID)
> - txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
> - else if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
> - txpd->u.bss.bss_num = MESH_IFACE_ID;
> - }
> -}
> -
> -
> -/***************************************************************************
> - * Mesh command handling
> - */
> -
> -/**
> - * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - * @add: TRUE to add the entry, FALSE to delete it
> - * @addr1: Destination address to blind or unblind
> - *
> - * returns: 0 on success, error on failure
> - */
> -int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1)
> -{
> - struct cmd_ds_bt_access cmd;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - BUG_ON(addr1 == NULL);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.hdr.size = cpu_to_le16(sizeof(cmd));
> - memcpy(cmd.addr1, addr1, ETH_ALEN);
> - if (add) {
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_ADD);
> - lbs_deb_hex(LBS_DEB_MESH, "BT_ADD: blinded MAC addr",
> - addr1, ETH_ALEN);
> - } else {
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_DEL);
> - lbs_deb_hex(LBS_DEB_MESH, "BT_DEL: blinded MAC addr",
> - addr1, ETH_ALEN);
> - }
> -
> - ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd);
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * lbs_mesh_bt_reset - Reset/clear the mesh blinding table
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - *
> - * returns: 0 on success, error on failure
> - */
> -int lbs_mesh_bt_reset(struct lbs_private *priv)
> -{
> - struct cmd_ds_bt_access cmd;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.hdr.size = cpu_to_le16(sizeof(cmd));
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_RESET);
> -
> - ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd);
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh
> - * blinding table
> - *
> - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> - * table, but an inverted table allows *only* traffic from nodes listed in
> - * the table.
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - * @inverted: On success, TRUE if the blinding table is inverted,
> - * FALSE if it is not inverted
> - *
> - * returns: 0 on success, error on failure
> - */
> -int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted)
> -{
> - struct cmd_ds_bt_access cmd;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - BUG_ON(inverted == NULL);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.hdr.size = cpu_to_le16(sizeof(cmd));
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_GET_INVERT);
> -
> - ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd);
> - if (ret == 0)
> - *inverted = !!cmd.id;
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh
> - * blinding table
> - *
> - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> - * table, but an inverted table allows *only* traffic from nodes listed in
> - * the table.
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - * @inverted: TRUE to invert the blinding table (only traffic from
> - * listed nodes allowed), FALSE to return it
> - * to normal state (listed nodes ignored)
> - *
> - * returns: 0 on success, error on failure
> - */
> -int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted)
> -{
> - struct cmd_ds_bt_access cmd;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.hdr.size = cpu_to_le16(sizeof(cmd));
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_SET_INVERT);
> - cmd.id = cpu_to_le32(!!inverted);
> -
> - ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd);
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - * @id: The ID of the entry to list
> - * @addr1: MAC address associated with the table entry
> - *
> - * returns: 0 on success, error on failure
> - */
> -int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1)
> -{
> - struct cmd_ds_bt_access cmd;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - BUG_ON(addr1 == NULL);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.hdr.size = cpu_to_le16(sizeof(cmd));
> - cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_SET_INVERT);
> - cmd.id = cpu_to_le32(id);
> -
> - ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd);
> - if (ret == 0)
> - memcpy(addr1, cmd.addr1, sizeof(cmd.addr1));
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * lbs_cmd_fwt_access - Access the mesh forwarding table
> - *
> - * @priv: A pointer to &struct lbs_private structure
> - * @cmd_action: The forwarding table action to perform
> - * @cmd: The pre-filled FWT_ACCESS command
> - *
> - * returns: 0 on success and 'cmd' will be filled with the
> - * firmware's response
> - */
> -int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action,
> - struct cmd_ds_fwt_access *cmd)
> -{
> - int ret;
> -
> - lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
> -
> - cmd->hdr.command = cpu_to_le16(CMD_FWT_ACCESS);
> - cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access));
> - cmd->hdr.result = 0;
> - cmd->action = cpu_to_le16(cmd_action);
> -
> - ret = lbs_cmd_with_response(priv, CMD_FWT_ACCESS, cmd);
> -
> - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
> - return 0;
> -}
> -
> -int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
> - struct cmd_ds_mesh_access *cmd)
> -{
> - int ret;
> -
> - lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
> -
> - cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS);
> - cmd->hdr.size = cpu_to_le16(sizeof(*cmd));
> - cmd->hdr.result = 0;
> -
> - cmd->action = cpu_to_le16(cmd_action);
> -
> - ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd);
> -
> - lbs_deb_leave(LBS_DEB_CMD);
> - return ret;
> -}
> -
> -static int __lbs_mesh_config_send(struct lbs_private *priv,
> - struct cmd_ds_mesh_config *cmd,
> - uint16_t action, uint16_t type)
> -{
> - int ret;
> - u16 command = CMD_MESH_CONFIG_OLD;
> -
> - lbs_deb_enter(LBS_DEB_CMD);
> -
> - /*
> - * Command id is 0xac for v10 FW along with mesh interface
> - * id in bits 14-13-12.
> - */
> - if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
> - command = CMD_MESH_CONFIG |
> - (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
> -
> - cmd->hdr.command = cpu_to_le16(command);
> - cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
> - cmd->hdr.result = 0;
> -
> - cmd->type = cpu_to_le16(type);
> - cmd->action = cpu_to_le16(action);
> -
> - ret = lbs_cmd_with_response(priv, command, cmd);
> -
> - lbs_deb_leave(LBS_DEB_CMD);
> - return ret;
> -}
> -
> -int lbs_mesh_config_send(struct lbs_private *priv,
> - struct cmd_ds_mesh_config *cmd,
> - uint16_t action, uint16_t type)
> -{
> - int ret;
> -
> - if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
> - return -EOPNOTSUPP;
> -
> - ret = __lbs_mesh_config_send(priv, cmd, action, type);
> - return ret;
> -}
> -
> -/* This function is the CMD_MESH_CONFIG legacy function. It only handles the
> - * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG
> - * are all handled by preparing a struct cmd_ds_mesh_config and passing it to
> - * lbs_mesh_config_send.
> - */
> -int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan)
> -{
> - struct cmd_ds_mesh_config cmd;
> - struct mrvl_meshie *ie;
> - DECLARE_SSID_BUF(ssid);
> -
> - memset(&cmd, 0, sizeof(cmd));
> - cmd.channel = cpu_to_le16(chan);
> - ie = (struct mrvl_meshie *)cmd.data;
> -
> - switch (action) {
> - case CMD_ACT_MESH_CONFIG_START:
> - ie->id = WLAN_EID_GENERIC;
> - ie->val.oui[0] = 0x00;
> - ie->val.oui[1] = 0x50;
> - ie->val.oui[2] = 0x43;
> - ie->val.type = MARVELL_MESH_IE_TYPE;
> - ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
> - ie->val.version = MARVELL_MESH_IE_VERSION;
> - ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
> - ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
> - ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
> - ie->val.mesh_id_len = priv->mesh_ssid_len;
> - memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
> - ie->len = sizeof(struct mrvl_meshie_val) -
> - IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
> - cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
> - break;
> - case CMD_ACT_MESH_CONFIG_STOP:
> - break;
> - default:
> - return -1;
> - }
> - lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
> - action, priv->mesh_tlv, chan,
> - print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len));
> -
> - return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
> -}
> -
> -
> -
> -/***************************************************************************
> - * Persistent configuration support
> - */
> -
> -static int mesh_get_default_parameters(struct device *dev,
> - struct mrvl_mesh_defaults *defs)
> -{
> - struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> - struct cmd_ds_mesh_config cmd;
> - int ret;
> -
> - memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
> - ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET,
> - CMD_TYPE_MESH_GET_DEFAULTS);
> -
> - if (ret)
> - return -EOPNOTSUPP;
> -
> - memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults));
> -
> - return 0;
> -}
> -
> -/**
> - * bootflag_get - Get function for sysfs attribute bootflag
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer where data will be returned
> - */
> -static ssize_t bootflag_get(struct device *dev,
> - struct device_attribute *attr, char *buf)
> -{
> - struct mrvl_mesh_defaults defs;
> - int ret;
> -
> - ret = mesh_get_default_parameters(dev, &defs);
> -
> - if (ret)
> - return ret;
> -
> - return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
> -}
> -
> -/**
> - * bootflag_set - Set function for sysfs attribute bootflag
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer that contains new attribute value
> - * @count: size of buffer
> - */
> -static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
> - const char *buf, size_t count)
> -{
> - struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> - struct cmd_ds_mesh_config cmd;
> - uint32_t datum;
> - int ret;
> -
> - memset(&cmd, 0, sizeof(cmd));
> - ret = sscanf(buf, "%d", &datum);
> - if ((ret != 1) || (datum > 1))
> - return -EINVAL;
> -
> - *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
> - cmd.length = cpu_to_le16(sizeof(uint32_t));
> - ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> - CMD_TYPE_MESH_SET_BOOTFLAG);
> - if (ret)
> - return ret;
> -
> - return strlen(buf);
> -}
> -
> -/**
> - * boottime_get - Get function for sysfs attribute boottime
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer where data will be returned
> - */
> -static ssize_t boottime_get(struct device *dev,
> - struct device_attribute *attr, char *buf)
> -{
> - struct mrvl_mesh_defaults defs;
> - int ret;
> -
> - ret = mesh_get_default_parameters(dev, &defs);
> -
> - if (ret)
> - return ret;
> + if (ret)
> + return ret;
>
> return snprintf(buf, 12, "%d\n", defs.boottime);
> }
> @@ -1103,173 +647,440 @@ static ssize_t protocol_id_set(struct device *dev,
> static ssize_t metric_id_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> - struct mrvl_mesh_defaults defs;
> - int ret;
> + struct mrvl_mesh_defaults defs;
> + int ret;
> +
> + ret = mesh_get_default_parameters(dev, &defs);
> +
> + if (ret)
> + return ret;
> +
> + return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id);
> +}
> +
> +/**
> + * metric_id_set - Set function for sysfs attribute metric_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> + */
> +static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct cmd_ds_mesh_config cmd;
> + struct mrvl_mesh_defaults defs;
> + struct mrvl_meshie *ie;
> + struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> + uint32_t datum;
> + int ret;
> +
> + memset(&cmd, 0, sizeof(cmd));
> + ret = sscanf(buf, "%d", &datum);
> + if ((ret != 1) || (datum > 255))
> + return -EINVAL;
> +
> + /* fetch all other Information Element parameters */
> + ret = mesh_get_default_parameters(dev, &defs);
> +
> + cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
> +
> + /* transfer IE elements */
> + ie = (struct mrvl_meshie *) &cmd.data[0];
> + memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
> + /* update metric id */
> + ie->val.active_metric_id = datum;
> +
> + ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> + CMD_TYPE_MESH_SET_MESH_IE);
> + if (ret)
> + return ret;
> +
> + return strlen(buf);
> +}
> +
> +/**
> + * capability_get - Get function for sysfs attribute capability
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> + */
> +static ssize_t capability_get(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct mrvl_mesh_defaults defs;
> + int ret;
> +
> + ret = mesh_get_default_parameters(dev, &defs);
> +
> + if (ret)
> + return ret;
> +
> + return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability);
> +}
> +
> +/**
> + * capability_set - Set function for sysfs attribute capability
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> + */
> +static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct cmd_ds_mesh_config cmd;
> + struct mrvl_mesh_defaults defs;
> + struct mrvl_meshie *ie;
> + struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> + uint32_t datum;
> + int ret;
> +
> + memset(&cmd, 0, sizeof(cmd));
> + ret = sscanf(buf, "%d", &datum);
> + if ((ret != 1) || (datum > 255))
> + return -EINVAL;
> +
> + /* fetch all other Information Element parameters */
> + ret = mesh_get_default_parameters(dev, &defs);
> +
> + cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
> +
> + /* transfer IE elements */
> + ie = (struct mrvl_meshie *) &cmd.data[0];
> + memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
> + /* update value */
> + ie->val.mesh_capability = datum;
> +
> + ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> + CMD_TYPE_MESH_SET_MESH_IE);
> + if (ret)
> + return ret;
> +
> + return strlen(buf);
> +}
> +
> +
> +static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set);
> +static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set);
> +static DEVICE_ATTR(channel, 0644, channel_get, channel_set);
> +static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set);
> +static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set);
> +static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set);
> +static DEVICE_ATTR(capability, 0644, capability_get, capability_set);
> +
> +static struct attribute *boot_opts_attrs[] = {
> + &dev_attr_bootflag.attr,
> + &dev_attr_boottime.attr,
> + &dev_attr_channel.attr,
> + NULL
> +};
> +
> +static const struct attribute_group boot_opts_group = {
> + .name = "boot_options",
> + .attrs = boot_opts_attrs,
> +};
> +
> +static struct attribute *mesh_ie_attrs[] = {
> + &dev_attr_mesh_id.attr,
> + &dev_attr_protocol_id.attr,
> + &dev_attr_metric_id.attr,
> + &dev_attr_capability.attr,
> + NULL
> +};
> +
> +static const struct attribute_group mesh_ie_group = {
> + .name = "mesh_ie",
> + .attrs = mesh_ie_attrs,
> +};
> +
> +static void lbs_persist_config_init(struct net_device *dev)
> +{
> + int ret;
> + ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
> + ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
> +}
> +
> +static void lbs_persist_config_remove(struct net_device *dev)
> +{
> + sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
> + sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
> +}
> +
> +
> +/***************************************************************************
> + * Initializing and starting, stopping mesh
> + */
> +
> +/*
> + * Check mesh FW version and appropriately send the mesh start
> + * command
> + */
> +int lbs_init_mesh(struct lbs_private *priv)
> +{
> + struct net_device *dev = priv->dev;
> + int ret = 0;
> +
> + lbs_deb_enter(LBS_DEB_MESH);
> +
> + priv->mesh_connect_status = LBS_DISCONNECTED;
> +
> + /* Determine mesh_fw_ver from fwrelease and fwcapinfo */
> + /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
> + /* 5.110.22 have mesh command with 0xa3 command id */
> + /* 10.0.0.p0 FW brings in mesh config command with different id */
> + /* Check FW version MSB and initialize mesh_fw_ver */
> + if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) {
> + /* Enable mesh, if supported, and work out which TLV it uses.
> + 0x100 + 291 is an unofficial value used in 5.110.20.pXX
> + 0x100 + 37 is the official value used in 5.110.21.pXX
> + but we check them in that order because 20.pXX doesn't
> + give an error -- it just silently fails. */
> +
> + /* 5.110.20.pXX firmware will fail the command if the channel
> + doesn't match the existing channel. But only if the TLV
> + is correct. If the channel is wrong, _BOTH_ versions will
> + give an error to 0x100+291, and allow 0x100+37 to succeed.
> + It's just that 5.110.20.pXX will not have done anything
> + useful */
> +
> + priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
> + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> + priv->channel)) {
> + priv->mesh_tlv = TLV_TYPE_MESH_ID;
> + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> + priv->channel))
> + priv->mesh_tlv = 0;
> + }
> + } else
> + if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
> + (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) {
> + /* 10.0.0.pXX new firmwares should succeed with TLV
> + * 0x100+37; Do not invoke command with old TLV.
> + */
> + priv->mesh_tlv = TLV_TYPE_MESH_ID;
> + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
> + priv->channel))
> + priv->mesh_tlv = 0;
> + }
> +
> +
> + if (priv->mesh_tlv) {
> + sprintf(priv->mesh_ssid, "mesh");
> + priv->mesh_ssid_len = 4;
> +
> + lbs_add_mesh(priv);
> +
> + if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
> + netdev_err(dev, "cannot register lbs_mesh attribute\n");
> +
> + ret = 1;
> + }
> +
> + lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> + return ret;
> +}
> +
> +
> +int lbs_deinit_mesh(struct lbs_private *priv)
> +{
> + struct net_device *dev = priv->dev;
> + int ret = 0;
>
> - ret = mesh_get_default_parameters(dev, &defs);
> + lbs_deb_enter(LBS_DEB_MESH);
>
> - if (ret)
> - return ret;
> + if (priv->mesh_tlv) {
> + device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
> + ret = 1;
> + }
>
> - return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id);
> + lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> + return ret;
> }
>
> +
> /**
> - * metric_id_set - Set function for sysfs attribute metric_id
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer that contains new attribute value
> - * @count: size of buffer
> + * lbs_mesh_stop - close the mshX interface
> + *
> + * @dev: A pointer to &net_device structure
> + * returns: 0
> */
> -static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
> - const char *buf, size_t count)
> +static int lbs_mesh_stop(struct net_device *dev)
> {
> - struct cmd_ds_mesh_config cmd;
> - struct mrvl_mesh_defaults defs;
> - struct mrvl_meshie *ie;
> - struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> - uint32_t datum;
> - int ret;
> + struct lbs_private *priv = dev->ml_priv;
>
> - memset(&cmd, 0, sizeof(cmd));
> - ret = sscanf(buf, "%d", &datum);
> - if ((ret != 1) || (datum > 255))
> - return -EINVAL;
> + lbs_deb_enter(LBS_DEB_MESH);
> + spin_lock_irq(&priv->driver_lock);
>
> - /* fetch all other Information Element parameters */
> - ret = mesh_get_default_parameters(dev, &defs);
> + priv->mesh_open = 0;
> + priv->mesh_connect_status = LBS_DISCONNECTED;
>
> - cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
> + netif_stop_queue(dev);
> + netif_carrier_off(dev);
>
> - /* transfer IE elements */
> - ie = (struct mrvl_meshie *) &cmd.data[0];
> - memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
> - /* update metric id */
> - ie->val.active_metric_id = datum;
> + spin_unlock_irq(&priv->driver_lock);
>
> - ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> - CMD_TYPE_MESH_SET_MESH_IE);
> - if (ret)
> - return ret;
> + schedule_work(&priv->mcast_work);
>
> - return strlen(buf);
> + lbs_deb_leave(LBS_DEB_MESH);
> + return 0;
> }
>
> /**
> - * capability_get - Get function for sysfs attribute capability
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer where data will be returned
> + * lbs_mesh_dev_open - open the mshX interface
> + *
> + * @dev: A pointer to &net_device structure
> + * returns: 0 or -EBUSY if monitor mode active
> */
> -static ssize_t capability_get(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static int lbs_mesh_dev_open(struct net_device *dev)
> {
> - struct mrvl_mesh_defaults defs;
> - int ret;
> + struct lbs_private *priv = dev->ml_priv;
> + int ret = 0;
>
> - ret = mesh_get_default_parameters(dev, &defs);
> + lbs_deb_enter(LBS_DEB_NET);
>
> - if (ret)
> - return ret;
> + spin_lock_irq(&priv->driver_lock);
>
> - return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability);
> + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + priv->mesh_open = 1;
> + priv->mesh_connect_status = LBS_CONNECTED;
> + netif_carrier_on(dev);
> +
> + if (!priv->tx_pending_len)
> + netif_wake_queue(dev);
> + out:
> +
> + spin_unlock_irq(&priv->driver_lock);
> + lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
> + return ret;
> }
>
> +static const struct net_device_ops mesh_netdev_ops = {
> + .ndo_open = lbs_mesh_dev_open,
> + .ndo_stop = lbs_mesh_stop,
> + .ndo_start_xmit = lbs_hard_start_xmit,
> + .ndo_set_mac_address = lbs_set_mac_address,
> + .ndo_set_multicast_list = lbs_set_multicast_list,
> +};
> +
> /**
> - * capability_set - Set function for sysfs attribute capability
> - * @dev: the &struct device
> - * @attr: device attributes
> - * @buf: buffer that contains new attribute value
> - * @count: size of buffer
> + * lbs_add_mesh - add mshX interface
> + *
> + * @priv: A pointer to the &struct lbs_private structure
> + * returns: 0 if successful, -X otherwise
> */
> -static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
> - const char *buf, size_t count)
> +static int lbs_add_mesh(struct lbs_private *priv)
> {
> - struct cmd_ds_mesh_config cmd;
> - struct mrvl_mesh_defaults defs;
> - struct mrvl_meshie *ie;
> - struct lbs_private *priv = to_net_dev(dev)->ml_priv;
> - uint32_t datum;
> - int ret;
> + struct net_device *mesh_dev = NULL;
> + int ret = 0;
>
> - memset(&cmd, 0, sizeof(cmd));
> - ret = sscanf(buf, "%d", &datum);
> - if ((ret != 1) || (datum > 255))
> - return -EINVAL;
> + lbs_deb_enter(LBS_DEB_MESH);
>
> - /* fetch all other Information Element parameters */
> - ret = mesh_get_default_parameters(dev, &defs);
> + /* Allocate a virtual mesh device */
> + mesh_dev = alloc_netdev(0, "msh%d", ether_setup);
> + if (!mesh_dev) {
> + lbs_deb_mesh("init mshX device failed\n");
> + ret = -ENOMEM;
> + goto done;
> + }
> + mesh_dev->ml_priv = priv;
> + priv->mesh_dev = mesh_dev;
>
> - cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
> + mesh_dev->netdev_ops = &mesh_netdev_ops;
> + mesh_dev->ethtool_ops = &lbs_ethtool_ops;
> + memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN);
>
> - /* transfer IE elements */
> - ie = (struct mrvl_meshie *) &cmd.data[0];
> - memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
> - /* update value */
> - ie->val.mesh_capability = datum;
> + SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
>
> - ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
> - CMD_TYPE_MESH_SET_MESH_IE);
> + mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
> + /* Register virtual mesh interface */
> + ret = register_netdev(mesh_dev);
> + if (ret) {
> + pr_err("cannot register mshX virtual interface\n");
> + goto err_free;
> + }
> +
> + ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
> if (ret)
> - return ret;
> + goto err_unregister;
>
> - return strlen(buf);
> -}
> + lbs_persist_config_init(mesh_dev);
>
> + /* Everything successful */
> + ret = 0;
> + goto done;
>
> -static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set);
> -static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set);
> -static DEVICE_ATTR(channel, 0644, channel_get, channel_set);
> -static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set);
> -static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set);
> -static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set);
> -static DEVICE_ATTR(capability, 0644, capability_get, capability_set);
> +err_unregister:
> + unregister_netdev(mesh_dev);
>
> -static struct attribute *boot_opts_attrs[] = {
> - &dev_attr_bootflag.attr,
> - &dev_attr_boottime.attr,
> - &dev_attr_channel.attr,
> - NULL
> -};
> +err_free:
> + free_netdev(mesh_dev);
>
> -static struct attribute_group boot_opts_group = {
> - .name = "boot_options",
> - .attrs = boot_opts_attrs,
> -};
> +done:
> + lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
> + return ret;
> +}
>
> -static struct attribute *mesh_ie_attrs[] = {
> - &dev_attr_mesh_id.attr,
> - &dev_attr_protocol_id.attr,
> - &dev_attr_metric_id.attr,
> - &dev_attr_capability.attr,
> - NULL
> -};
> +void lbs_remove_mesh(struct lbs_private *priv)
> +{
> + struct net_device *mesh_dev;
>
> -static struct attribute_group mesh_ie_group = {
> - .name = "mesh_ie",
> - .attrs = mesh_ie_attrs,
> -};
> + mesh_dev = priv->mesh_dev;
> + if (!mesh_dev)
> + return;
>
> -void lbs_persist_config_init(struct net_device *dev)
> -{
> - int ret;
> - ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
> - ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
> + lbs_deb_enter(LBS_DEB_MESH);
> + netif_stop_queue(mesh_dev);
> + netif_carrier_off(mesh_dev);
> + sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
> + lbs_persist_config_remove(mesh_dev);
> + unregister_netdev(mesh_dev);
> + priv->mesh_dev = NULL;
> + free_netdev(mesh_dev);
> + lbs_deb_leave(LBS_DEB_MESH);
> }
>
> -void lbs_persist_config_remove(struct net_device *dev)
> +
> +/***************************************************************************
> + * Sending and receiving
> + */
> +struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
> + struct net_device *dev, struct rxpd *rxpd)
> {
> - sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
> - sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
> + if (priv->mesh_dev) {
> + if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) {
> + if (rxpd->rx_control & RxPD_MESH_FRAME)
> + dev = priv->mesh_dev;
> + } else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) {
> + if (rxpd->u.bss.bss_num == MESH_IFACE_ID)
> + dev = priv->mesh_dev;
> + }
> + }
> + return dev;
> }
>
>
> +void lbs_mesh_set_txpd(struct lbs_private *priv,
> + struct net_device *dev, struct txpd *txpd)
> +{
> + if (dev == priv->mesh_dev) {
> + if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID)
> + txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
> + else if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
> + txpd->u.bss.bss_num = MESH_IFACE_ID;
> + }
> +}
> +
>
> /***************************************************************************
> * Ethtool related
> */
>
> -static const char *mesh_stat_strings[] = {
> +static const char * const mesh_stat_strings[] = {
> "drop_duplicate_bcast",
> "drop_ttl_zero",
> "drop_no_fwd_route",
> diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
> index ee95c73..7d3dd81 100644
> --- a/drivers/net/wireless/libertas/mesh.h
> +++ b/drivers/net/wireless/libertas/mesh.h
> @@ -31,7 +31,6 @@ struct lbs_private;
> int lbs_init_mesh(struct lbs_private *priv);
> int lbs_deinit_mesh(struct lbs_private *priv);
>
> -int lbs_add_mesh(struct lbs_private *priv);
> void lbs_remove_mesh(struct lbs_private *priv);
>
>
> @@ -52,29 +51,6 @@ struct cmd_ds_command;
> struct cmd_ds_mesh_access;
> struct cmd_ds_mesh_config;
>
> -int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1);
> -int lbs_mesh_bt_reset(struct lbs_private *priv);
> -int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted);
> -int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted);
> -int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1);
> -
> -int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action,
> - struct cmd_ds_fwt_access *cmd);
> -
> -int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
> - struct cmd_ds_mesh_access *cmd);
> -int lbs_mesh_config_send(struct lbs_private *priv,
> - struct cmd_ds_mesh_config *cmd,
> - uint16_t action, uint16_t type);
> -int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
> -
> -
> -
> -/* Persistent configuration */
> -
> -void lbs_persist_config_init(struct net_device *net);
> -void lbs_persist_config_remove(struct net_device *net);
> -
>
> /* Ethtool statistics */
>
More information about the libertas-dev
mailing list