AT91 SDIO WiFi no working
Ludovic Desroches
ludovic.desroches at atmel.com
Tue Jul 19 10:30:48 EDT 2011
Hello all.
On 7/13/2011 8:27 PM, Paulo Fragoso wrote:
> Hi,
>
> We are trying to run SDIO WiFI with a board based on AT91sam9 and our
> configuration and firmware files are apparently ok but now we have got
> this erro:
>
> root at buildroot:~# modprobe libertas
> root at buildroot:~# modprobe libertas_sdio.ko
> helper_name=/lib/firmware/sd8686_v8_
> helper.bin fw_name=/lib/firmware/sd8686_v8.bin
> libertas_sdio: Libertas SDIO driver
> libertas_sdio: Copyright Pierre Ossman
> libertas: can't load helper firmware
> libertas: failed to load helper firmware
> libertas_sdio: probe of mmc0:0001:1 failed with error -2
>
> udev is running too, what might be happening?
>
> Thanks,
> Paulo.
>
I am also facing some problems using the libertas driver. I am not sure
that it's the same problem as Paulo because I don't know which kernel
version he is using. It's probably not the best place to talk about this
because I don't think the problem is coming from at91 mmc driver, that's
why I also send this message to libertas-dev.
I have made my tests with 3.0-rc7 version this what I have (I have added
some traces) :
root at at91sam9g20ek:~# insmod libertas.ko libertas_debug=0x5063a7
[ 52.220000] libertas enter: lbs_init_module()
[ 52.220000] libertas leave: lbs_init_module()
root at at91sam9g20ek:~#
root at at91sam9g20ek:~#
root at at91sam9g20ek:~#
root at at91sam9g20ek:~# insmod libertas_sdio.ko
helper_name="helper_sd.bin" fw_nam
e="sd8686.bin"
[ 55.450000] libertas enter: if_sdio_init_module()
[ 55.450000] libertas_sdio: Libertas SDIO driver
[ 55.460000] libertas_sdio: Copyright Pierre Ossman
[ 55.460000] libertas leave: if_sdio_init_module(), ret 0
root at at91sam9g20ek:~# [ 58.020000] mmc1: new SDIO card at address 0001
[ 58.030000] libertas enter: if_sdio_probe()
[ 58.030000] libertas sdio: class = 0x7, vendor = 0x2DF, device =
0x9103, model = 0xB, ioport = 0x10000
[ 58.040000] libertas enter: if_sdio_prog_firmware()
[ 58.060000] libertas sdio: firmware status = 0x0
[ 58.060000] libertas sdio: scratch ret = 0
[ 58.060000] libertas_sdio mmc1:0001:1: load user helper firmware:
helper_sd.bin
[ 58.110000] libertas_sdio mmc1:0001:1: helperfw size: 2516
[ 58.120000] libertas_sdio mmc1:0001:1: load user main firmware:
sd8686.bin
[ 58.170000] libertas_sdio mmc1:0001:1: mainfw size: 2516
[ 58.170000] libertas enter: if_sdio_prog_helper()
[ 58.380000] libertas sdio: waiting for helper to boot...
[ 58.380000] libertas leave: if_sdio_prog_helper(), ret 0
[ 58.390000] libertas sdio: Helper firmware loaded
[ 58.390000] libertas enter: if_sdio_prog_real()
[ 58.400000] libertas sdio: firmware size: 2516
[ 58.400000] libertas sdio: firmware wants 16 bytes
[ 58.410000] libertas sdio: sending 16 bytes (32 bytes) chunk
[ 58.420000] libertas sdio: firmware wants 17 bytes
[ 58.420000] libertas sdio: firmware helper signalled error
[ 58.430000] libertas_sdio: failed to load firmware
[ 58.430000] libertas leave: if_sdio_prog_real(), ret -5
[ 58.440000] libertas leave: if_sdio_prog_firmware(), ret -5
[ 58.450000] libertas leave: if_sdio_probe(), ret -5
[ 58.450000] libertas_sdio: probe of mmc1:0001:1 failed with error -5
The first problem is the main firmware size which is the size of the
helper firmware.
Now the second problem:
[1140] msg_queue_insert: seq 540 queued, 'add' 'firmware'
[1170] run_program: 'firmware.sh'
[1140] udev_event_run: seq 540 forked, pid [1170], 'add' 'firmware',
0 seconds old
[1170] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
helper_sd.bin'
[1170] run_program: '/lib/udev/firmware.sh' returned with status 0
[1170] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1170] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1170] run_program: '/lib/udev/firmware.sh'
[1170] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
helper_sd.bin'
[1170] run_program: '/lib/udev/firmware.sh' returned with status 0
[1170] udev_event_run: seq 540 finished with 0
[1140] msg_queue_insert: seq 541 queued, 'remove' 'firmware'
[1175] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1175] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1175] udev_event_run: seq 541 finished with 0
[1140] udev_event_run: seq 541 forked, pid [1175], 'remove'
'firmware', 0 seconds old
[1140] msg_queue_insert: seq 542 queued, 'add' 'firmware'
[1140] udev_event_run: seq 542 forked, pid [1176], 'add' 'firmware',
0 seconds old
[1176] run_program: 'firmware.sh'
[1176] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
sd8686.bin'
[1176] run_program: '/lib/udev/firmware.sh' (stderr) 'udev firmware
loader misses sysfs directory'
[1176] run_program: '/lib/udev/firmware.sh' returned with status 1
[1176] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1176] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1176] run_program: '/lib/udev/firmware.sh'
[1176] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
sd8686.bin'
[1176] run_program: '/lib/udev/firmware.sh' (stderr) 'udev firmware
loader misses sysfs directory'
[1176] run_program: '/lib/udev/firmware.sh' returned with status 1
[1176] udev_event_run: seq 542 finished with -1
I don't understand why I have two to firmware.sh for helper_sd.bin and
also for sd8686.bin. The second part I don't understand is why the sysfs
entries for the firmware have been removed between the two uevent.
The function dealing with firmwares is lbs_get_firmware where we have
two successive request_firmware calls. I am confused about the behavior
but I had the feeling that the two successive request_firmware calls was
the problem because the main firmware size is those of the helper
firmware. That's why I did this:
commit 53ad5481c1d659da920e950f47ae25cbfc288239
Author: Ludovic Desroches <ludovic.desroches at atmel.com>
Date: Tue Jul 19 15:52:26 2011 +0200
libertas: separate helper and main firmware request
Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
diff --git a/drivers/net/wireless/libertas/if_sdio.c
b/drivers/net/wireless/libertas/if_sdio.c
index 224e985..01e530c 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -723,7 +723,7 @@ static int if_sdio_prog_firmware(struct
if_sdio_card *card)
}
ret = lbs_get_firmware(&card->func->dev, lbs_helper_name,
lbs_fw_name,
- card->model, &fw_table[0], &helper, &mainfw);
+ card->model, &fw_table[0], &helper, NULL);
if (ret) {
pr_err("failed to find firmware (%d)\n", ret);
goto out;
@@ -735,6 +735,10 @@ static int if_sdio_prog_firmware(struct
if_sdio_card *card)
lbs_deb_sdio("Helper firmware loaded\n");
+ ret = lbs_get_firmware(&card->func->dev, lbs_helper_name,
lbs_fw_name,
+ card->model, &fw_table[0], NULL, &mainfw);
+
+
ret = if_sdio_prog_real(card, mainfw);
if (ret)
goto out;
diff --git a/drivers/net/wireless/libertas/main.c
b/drivers/net/wireless/libertas/main.c
index 8c40949..b35ca07 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1075,11 +1075,9 @@ int lbs_get_firmware(struct device *dev,
const char *user_helper,
const struct lbs_fw_table *iter;
int ret;
- BUG_ON(helper == NULL);
- BUG_ON(mainfw == NULL);
-
/* Try user-specified firmware first */
- if (user_helper) {
+ if (user_helper && helper) {
+ dev_info(dev, "load user helper firmware: %s\n", user_helper);
ret = request_firmware(helper, user_helper, dev);
if (ret) {
dev_err(dev, "couldn't find helper firmware %s\n",
@@ -1087,7 +1085,8 @@ int lbs_get_firmware(struct device *dev, const
char *user_helper,
goto fail;
}
}
- if (user_mainfw) {
+ if (user_mainfw && mainfw) {
+ dev_info(dev, "load user main firmware: %s\n", user_mainfw);
ret = request_firmware(mainfw, user_mainfw, dev);
if (ret) {
dev_err(dev, "couldn't find main firmware %s\n",
@@ -1096,8 +1095,7 @@ int lbs_get_firmware(struct device *dev, const
char *user_helper,
}
}
- if (*helper && *mainfw)
- return 0;
+ return 0;
/* Otherwise search for firmware to use. If neither the helper or
* the main firmware were specified by the user, then we need to
Everything is ok with my patch but I would like to understand what
happens, why I need this patch and if it is correct or just a lucky
horrible hack ! Here the udev logs seems more logical even if I still
have two requests for each firmware. The first call is ok but the second
fails because of missing sysfs entries.
[1113] msg_queue_insert: seq 524 queued, 'add' 'firmware'
[1113] udev_event_run: seq 524 forked, pid [1125], 'add' 'firmware',
0 seconds old
[1125] run_program: 'firmware.sh'
[1125] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
helper_sd.bin'
[1125] run_program: '/lib/udev/firmware.sh' returned with status 0
[1125] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1125] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1125] run_program: '/lib/udev/firmware.sh'
[1125] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
helper_sd.bin'
[1125] run_program: '/lib/udev/firmware.sh' (stderr) 'udev firmware
loader misses sysfs directory'
[1125] run_program: '/lib/udev/firmware.sh' returned with status 1
[1125] udev_event_run: seq 524 finished with -1
[1113] msg_queue_insert: seq 525 queued, 'remove' 'firmware'
[1113] udev_event_run: seq 525 forked, pid [1130], 'remove'
'firmware', 0 seconds old
[1130] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1130] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1130] udev_event_run: seq 525 finished with 0
[ 95.140000] libertas_sdio mmc1:0001:1: load user main firmware:
sd8686.bin
[1113] msg_queue_insert: seq 526 queued, 'add' 'firmware'
[1113] udev_event_run: seq 526 forked, pid [1131], 'add' 'firmware',
0 seconds old
[1131] run_program: 'firmware.sh'
[1131] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
sd8686.bin'
[1131] run_program: '/lib/udev/firmware.sh' returned with status 0
[1131] pass_env_to_socket: passed -1 bytes to socket
'@/org/kernel/udev/monitor',
[1131] pass_env_to_socket: passed -1 bytes to socket
'/org/kernel/udev/monitor',
[1131] run_program: '/lib/udev/firmware.sh'
[1131] run_program: '/lib/udev/firmware.sh' (stdout) 'firmware:
sd8686.bin'
[1131] run_program: '/lib/udev/firmware.sh' (stderr) 'udev firmware
loader misses sysfs directory'
[1131] run_program: '/lib/udev/firmware.sh' returned with status 1
[1131] udev_event_run: seq 526 finished with -1
Thanks for you help.
Regards,
Ludovic
More information about the libertas-dev
mailing list