[PATCH] libertas: use kernel-doc notation, fix comment style
Dan Williams
dcbw at redhat.com
Wed Apr 27 15:04:27 EDT 2011
On Tue, 2011-04-26 at 15:25 -0700, Randy Dunlap wrote:
> From: Randy Dunlap <randy.dunlap at oracle.com>
>
> Convert all libertas/ files to use kernel-doc notation instead
> of whatever it was (doxygen?).
>
> Add or fix function parameters in several places.
>
> Use expected style for multi-line comments in lots of places.
>
> Remove erroneous /** in multiple places.
>
> Signed-off-by: Randy Dunlap <randy.dunlap at oracle.com>
Acked-by: Dan Williams <dcbw at redhat.com>
> ---
> drivers/net/wireless/libertas/cfg.c | 45 ++--
> drivers/net/wireless/libertas/cmd.c | 245 +++++++++++-----------
> drivers/net/wireless/libertas/cmdresp.c | 19 -
> drivers/net/wireless/libertas/debugfs.c | 36 +--
> drivers/net/wireless/libertas/decl.h | 8
> drivers/net/wireless/libertas/defs.h | 113 +++++-----
> drivers/net/wireless/libertas/dev.h | 20 -
> drivers/net/wireless/libertas/ethtool.c | 3
> drivers/net/wireless/libertas/host.h | 33 +-
> drivers/net/wireless/libertas/if_cs.c | 35 ++-
> drivers/net/wireless/libertas/if_spi.c | 134 +++++++-----
> drivers/net/wireless/libertas/if_spi.h | 68 +++---
> drivers/net/wireless/libertas/if_usb.c | 113 +++++-----
> drivers/net/wireless/libertas/if_usb.h | 14 -
> drivers/net/wireless/libertas/main.c | 99 ++++----
> drivers/net/wireless/libertas/mesh.c | 210 ++++++++++++------
> drivers/net/wireless/libertas/mesh.h | 6
> drivers/net/wireless/libertas/rx.c | 34 +--
> drivers/net/wireless/libertas/tx.c | 34 +--
> drivers/net/wireless/libertas/types.h | 18 -
> 20 files changed, 730 insertions(+), 557 deletions(-)
>
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/decl.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/decl.h
> @@ -1,8 +1,8 @@
>
> -/**
> - * This file contains declaration referring to
> - * functions defined in other source files
> - */
> +/*
> + * This file contains declaration referring to
> + * functions defined in other source files
> + */
>
> #ifndef _LBS_DECL_H_
> #define _LBS_DECL_H_
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/defs.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/defs.h
> @@ -1,7 +1,7 @@
> -/**
> - * This header file contains global constant/enum definitions,
> - * global variable declaration.
> - */
> +/*
> + * This header file contains global constant/enum definitions,
> + * global variable declaration.
> + */
> #ifndef _LBS_DEFS_H_
> #define _LBS_DEFS_H_
>
> @@ -123,19 +123,19 @@ static inline void lbs_deb_hex(unsigned
>
>
>
> -/** Buffer Constants */
> +/* Buffer Constants */
>
> /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
> -* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
> -* driver has more local TxPDs. Each TxPD on the host memory is associated
> -* with a Tx control node. The driver maintains 8 RxPD descriptors for
> -* station firmware to store Rx packet information.
> -*
> -* Current version of MAC has a 32x6 multicast address buffer.
> -*
> -* 802.11b can have up to 14 channels, the driver keeps the
> -* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
> -*/
> + * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
> + * driver has more local TxPDs. Each TxPD on the host memory is associated
> + * with a Tx control node. The driver maintains 8 RxPD descriptors for
> + * station firmware to store Rx packet information.
> + *
> + * Current version of MAC has a 32x6 multicast address buffer.
> + *
> + * 802.11b can have up to 14 channels, the driver keeps the
> + * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
> + */
>
> #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
> #define LBS_NUM_CMD_BUFFERS 10
> @@ -166,7 +166,7 @@ static inline void lbs_deb_hex(unsigned
> #define WOL_RESULT_NOSPC_ERR 1
> #define WOL_RESULT_EEXIST_ERR 2
>
> -/** Misc constants */
> +/* Misc constants */
> /* This section defines 802.11 specific contants */
>
> #define MRVDRV_MAX_BSS_DESCRIPTS 16
> @@ -183,7 +183,8 @@ static inline void lbs_deb_hex(unsigned
>
> #define MARVELL_MESH_IE_LENGTH 9
>
> -/* Values used to populate the struct mrvl_mesh_ie. The only time you need this
> +/*
> + * Values used to populate the struct mrvl_mesh_ie. The only time you need this
> * is when enabling the mesh using CMD_MESH_CONFIG.
> */
> #define MARVELL_MESH_IE_TYPE 4
> @@ -193,7 +194,7 @@ static inline void lbs_deb_hex(unsigned
> #define MARVELL_MESH_METRIC_ID 0
> #define MARVELL_MESH_CAPABILITY 0
>
> -/** INT status Bit Definition*/
> +/* INT status Bit Definition */
> #define MRVDRV_TX_DNLD_RDY 0x0001
> #define MRVDRV_RX_UPLD_RDY 0x0002
> #define MRVDRV_CMD_DNLD_RDY 0x0004
> @@ -208,59 +209,63 @@ static inline void lbs_deb_hex(unsigned
> #define TPC_DEFAULT_P1 10
> #define TPC_DEFAULT_P2 13
>
> -/** TxPD status */
> +/* TxPD status */
>
> -/* Station firmware use TxPD status field to report final Tx transmit
> -* result, Bit masks are used to present combined situations.
> -*/
> +/*
> + * Station firmware use TxPD status field to report final Tx transmit
> + * result, Bit masks are used to present combined situations.
> + */
>
> #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
> #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
>
> -/** Tx mesh flag */
> -/* Currently we are using normal WDS flag as mesh flag.
> +/* Tx mesh flag */
> +/*
> + * Currently we are using normal WDS flag as mesh flag.
> * TODO: change to proper mesh flag when MAC understands it.
> */
> #define TxPD_CONTROL_WDS_FRAME (1<<17)
> #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
>
> -/** Mesh interface ID */
> +/* Mesh interface ID */
> #define MESH_IFACE_ID 0x0001
> -/** Mesh id should be in bits 14-13-12 */
> +/* Mesh id should be in bits 14-13-12 */
> #define MESH_IFACE_BIT_OFFSET 0x000c
> -/** Mesh enable bit in FW capability */
> +/* Mesh enable bit in FW capability */
> #define MESH_CAPINFO_ENABLE_MASK (1<<16)
>
> -/** FW definition from Marvell v4 */
> +/* FW definition from Marvell v4 */
> #define MRVL_FW_V4 (0x04)
> -/** FW definition from Marvell v5 */
> +/* FW definition from Marvell v5 */
> #define MRVL_FW_V5 (0x05)
> -/** FW definition from Marvell v10 */
> +/* FW definition from Marvell v10 */
> #define MRVL_FW_V10 (0x0a)
> -/** FW major revision definition */
> +/* FW major revision definition */
> #define MRVL_FW_MAJOR_REV(x) ((x)>>24)
>
> -/** RxPD status */
> +/* RxPD status */
>
> #define MRVDRV_RXPD_STATUS_OK 0x0001
>
> -/** RxPD status - Received packet types */
> -/** Rx mesh flag */
> -/* Currently we are using normal WDS flag as mesh flag.
> +/* RxPD status - Received packet types */
> +/* Rx mesh flag */
> +/*
> + * Currently we are using normal WDS flag as mesh flag.
> * TODO: change to proper mesh flag when MAC understands it.
> */
> #define RxPD_CONTROL_WDS_FRAME (0x40)
> #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
>
> -/** RSSI-related defines */
> -/* RSSI constants are used to implement 802.11 RSSI threshold
> -* indication. if the Rx packet signal got too weak for 5 consecutive
> -* times, miniport driver (driver) will report this event to wrapper
> -*/
> +/* RSSI-related defines */
> +/*
> + * RSSI constants are used to implement 802.11 RSSI threshold
> + * indication. if the Rx packet signal got too weak for 5 consecutive
> + * times, miniport driver (driver) will report this event to wrapper
> + */
>
> #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
>
> -/** RTS/FRAG related defines */
> +/* RTS/FRAG related defines */
> #define MRVDRV_RTS_MIN_VALUE 0
> #define MRVDRV_RTS_MAX_VALUE 2347
> #define MRVDRV_FRAG_MIN_VALUE 256
> @@ -300,36 +305,36 @@ static inline void lbs_deb_hex(unsigned
>
> #define MAX_LEDS 8
>
> -/** Global Variable Declaration */
> +/* Global Variable Declaration */
> extern const char lbs_driver_version[];
> extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
>
>
> -/** ENUM definition*/
> -/** SNRNF_TYPE */
> +/* ENUM definition */
> +/* SNRNF_TYPE */
> enum SNRNF_TYPE {
> TYPE_BEACON = 0,
> TYPE_RXPD,
> MAX_TYPE_B
> };
>
> -/** SNRNF_DATA*/
> +/* SNRNF_DATA */
> enum SNRNF_DATA {
> TYPE_NOAVG = 0,
> TYPE_AVG,
> MAX_TYPE_AVG
> };
>
> -/** LBS_802_11_POWER_MODE */
> +/* LBS_802_11_POWER_MODE */
> enum LBS_802_11_POWER_MODE {
> LBS802_11POWERMODECAM,
> LBS802_11POWERMODEMAX_PSP,
> LBS802_11POWERMODEFAST_PSP,
> - /*not a real mode, defined as an upper bound */
> + /* not a real mode, defined as an upper bound */
> LBS802_11POWEMODEMAX
> };
>
> -/** PS_STATE */
> +/* PS_STATE */
> enum PS_STATE {
> PS_STATE_FULL_POWER,
> PS_STATE_AWAKE,
> @@ -337,7 +342,7 @@ enum PS_STATE {
> PS_STATE_SLEEP
> };
>
> -/** DNLD_STATE */
> +/* DNLD_STATE */
> enum DNLD_STATE {
> DNLD_RES_RECEIVED,
> DNLD_DATA_SENT,
> @@ -345,19 +350,19 @@ enum DNLD_STATE {
> DNLD_BOOTCMD_SENT,
> };
>
> -/** LBS_MEDIA_STATE */
> +/* LBS_MEDIA_STATE */
> enum LBS_MEDIA_STATE {
> LBS_CONNECTED,
> LBS_DISCONNECTED
> };
>
> -/** LBS_802_11_PRIVACY_FILTER */
> +/* LBS_802_11_PRIVACY_FILTER */
> enum LBS_802_11_PRIVACY_FILTER {
> LBS802_11PRIVFILTERACCEPTALL,
> LBS802_11PRIVFILTER8021XWEP
> };
>
> -/** mv_ms_type */
> +/* mv_ms_type */
> enum mv_ms_type {
> MVMS_DAT = 0,
> MVMS_CMD = 1,
> @@ -365,14 +370,14 @@ enum mv_ms_type {
> MVMS_EVENT
> };
>
> -/** KEY_TYPE_ID */
> +/* KEY_TYPE_ID */
> enum KEY_TYPE_ID {
> KEY_TYPE_ID_WEP = 0,
> KEY_TYPE_ID_TKIP,
> KEY_TYPE_ID_AES
> };
>
> -/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
> +/* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
> enum KEY_INFO_WPA {
> KEY_INFO_WPA_MCAST = 0x01,
> KEY_INFO_WPA_UNICAST = 0x02,
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/dev.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/dev.h
> @@ -1,8 +1,8 @@
> -/**
> - * This file contains definitions and data structures specific
> - * to Marvell 802.11 NIC. It contains the Device Information
> - * structure struct lbs_private..
> - */
> +/*
> + * This file contains definitions and data structures specific
> + * to Marvell 802.11 NIC. It contains the Device Information
> + * structure struct lbs_private..
> + */
> #ifndef _LBS_DEV_H_
> #define _LBS_DEV_H_
>
> @@ -12,7 +12,7 @@
>
> #include <linux/kfifo.h>
>
> -/** sleep_params */
> +/* sleep_params */
> struct sleep_params {
> uint16_t sp_error;
> uint16_t sp_offset;
> @@ -23,7 +23,7 @@ struct sleep_params {
> };
>
>
> -/** Private structure for the MV device */
> +/* Private structure for the MV device */
> struct lbs_private {
>
> /* Basic networking */
> @@ -125,12 +125,12 @@ struct lbs_private {
> /* Events sent from hardware to driver */
> struct kfifo event_fifo;
>
> - /** thread to service interrupts */
> + /* thread to service interrupts */
> struct task_struct *main_thread;
> wait_queue_head_t waitq;
> struct workqueue_struct *work_thread;
>
> - /** Encryption stuff */
> + /* Encryption stuff */
> u8 authtype_auto;
> u8 wep_tx_key;
> u8 wep_key[4][WLAN_KEY_LEN_WEP104];
> @@ -162,7 +162,7 @@ struct lbs_private {
> s16 txpower_min;
> s16 txpower_max;
>
> - /** Scanning */
> + /* Scanning */
> struct delayed_work scan_work;
> int scan_channel;
> /* Queue of things waiting for scan completion */
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/host.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/host.h
> @@ -1,7 +1,7 @@
> -/**
> - * This file function prototypes, data structure
> - * and definitions for all the host/station commands
> - */
> +/*
> + * This file function prototypes, data structure
> + * and definitions for all the host/station commands
> + */
>
> #ifndef _LBS_HOST_H_
> #define _LBS_HOST_H_
> @@ -13,9 +13,10 @@
>
> #define CMD_OPTION_WAITFORRSP 0x0002
>
> -/** Host command IDs */
> +/* Host command IDs */
>
> -/* Return command are almost always the same as the host command, but with
> +/*
> + * Return command are almost always the same as the host command, but with
> * bit 15 set high. There are a few exceptions, though...
> */
> #define CMD_RET(cmd) (0x8000 | cmd)
> @@ -251,7 +252,7 @@ enum cmd_mesh_config_types {
> CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
> };
>
> -/** Card Event definition */
> +/* Card Event definition */
> #define MACREG_INT_CODE_TX_PPA_FREE 0
> #define MACREG_INT_CODE_TX_DMA_DONE 1
> #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
> @@ -624,12 +625,14 @@ struct cmd_ds_802_11_rf_channel {
> struct cmd_ds_802_11_rssi {
> struct cmd_header hdr;
>
> - /* request: number of beacons (N) to average the SNR and NF over
> + /*
> + * request: number of beacons (N) to average the SNR and NF over
> * response: SNR of most recent beacon
> */
> __le16 n_or_snr;
>
> - /* The following fields are only set in the response.
> + /*
> + * The following fields are only set in the response.
> * In the request these are reserved and should be set to 0.
> */
> __le16 nf; /* most recent beacon noise floor */
> @@ -680,14 +683,16 @@ struct cmd_ds_802_11_ps_mode {
>
> __le16 action;
>
> - /* Interval for keepalive in PS mode:
> + /*
> + * Interval for keepalive in PS mode:
> * 0x0000 = don't change
> * 0x001E = firmware default
> * 0xFFFF = disable
> */
> __le16 nullpktinterval;
>
> - /* Number of DTIM intervals to wake up for:
> + /*
> + * Number of DTIM intervals to wake up for:
> * 0 = don't change
> * 1 = firmware default
> * 5 = max
> @@ -697,7 +702,8 @@ struct cmd_ds_802_11_ps_mode {
> __le16 reserved;
> __le16 locallisteninterval;
>
> - /* AdHoc awake period (FW v9+ only):
> + /*
> + * AdHoc awake period (FW v9+ only):
> * 0 = don't change
> * 1 = always awake (IEEE standard behavior)
> * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
> @@ -771,7 +777,8 @@ struct adhoc_bssdesc {
> __le16 capability;
> u8 rates[MAX_RATES];
>
> - /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
> + /*
> + * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
> * Adhoc join command and will cause a binary layout mismatch with
> * the firmware
> */
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/if_spi.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/if_spi.h
> @@ -86,34 +86,34 @@
> #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff)
>
> /***************** IF_SPI_HOST_INT_CTRL_REG *****************/
> -/** Host Interrupt Control bit : Wake up */
> +/* Host Interrupt Control bit : Wake up */
> #define IF_SPI_HICT_WAKE_UP (1<<0)
> -/** Host Interrupt Control bit : WLAN ready */
> +/* Host Interrupt Control bit : WLAN ready */
> #define IF_SPI_HICT_WLAN_READY (1<<1)
> /*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY (1<<2) */
> /*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY (1<<3) */
> /*#define IF_SPI_HICT_IRQSRC_WLAN (1<<4) */
> -/** Host Interrupt Control bit : Tx auto download */
> +/* Host Interrupt Control bit : Tx auto download */
> #define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO (1<<5)
> -/** Host Interrupt Control bit : Rx auto upload */
> +/* Host Interrupt Control bit : Rx auto upload */
> #define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO (1<<6)
> -/** Host Interrupt Control bit : Command auto download */
> +/* Host Interrupt Control bit : Command auto download */
> #define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO (1<<7)
> -/** Host Interrupt Control bit : Command auto upload */
> +/* Host Interrupt Control bit : Command auto upload */
> #define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO (1<<8)
>
> /***************** IF_SPI_CARD_INT_CAUSE_REG *****************/
> -/** Card Interrupt Case bit : Tx download over */
> +/* Card Interrupt Case bit : Tx download over */
> #define IF_SPI_CIC_TX_DOWNLOAD_OVER (1<<0)
> -/** Card Interrupt Case bit : Rx upload over */
> +/* Card Interrupt Case bit : Rx upload over */
> #define IF_SPI_CIC_RX_UPLOAD_OVER (1<<1)
> -/** Card Interrupt Case bit : Command download over */
> +/* Card Interrupt Case bit : Command download over */
> #define IF_SPI_CIC_CMD_DOWNLOAD_OVER (1<<2)
> -/** Card Interrupt Case bit : Host event */
> +/* Card Interrupt Case bit : Host event */
> #define IF_SPI_CIC_HOST_EVENT (1<<3)
> -/** Card Interrupt Case bit : Command upload over */
> +/* Card Interrupt Case bit : Command upload over */
> #define IF_SPI_CIC_CMD_UPLOAD_OVER (1<<4)
> -/** Card Interrupt Case bit : Power down */
> +/* Card Interrupt Case bit : Power down */
> #define IF_SPI_CIC_POWER_DOWN (1<<5)
>
> /***************** IF_SPI_CARD_INT_STATUS_REG *****************/
> @@ -138,51 +138,51 @@
> #define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW (1<<10)
>
> /***************** IF_SPI_HOST_INT_STATUS_REG *****************/
> -/** Host Interrupt Status bit : Tx download ready */
> +/* Host Interrupt Status bit : Tx download ready */
> #define IF_SPI_HIST_TX_DOWNLOAD_RDY (1<<0)
> -/** Host Interrupt Status bit : Rx upload ready */
> +/* Host Interrupt Status bit : Rx upload ready */
> #define IF_SPI_HIST_RX_UPLOAD_RDY (1<<1)
> -/** Host Interrupt Status bit : Command download ready */
> +/* Host Interrupt Status bit : Command download ready */
> #define IF_SPI_HIST_CMD_DOWNLOAD_RDY (1<<2)
> -/** Host Interrupt Status bit : Card event */
> +/* Host Interrupt Status bit : Card event */
> #define IF_SPI_HIST_CARD_EVENT (1<<3)
> -/** Host Interrupt Status bit : Command upload ready */
> +/* Host Interrupt Status bit : Command upload ready */
> #define IF_SPI_HIST_CMD_UPLOAD_RDY (1<<4)
> -/** Host Interrupt Status bit : I/O write FIFO overflow */
> +/* Host Interrupt Status bit : I/O write FIFO overflow */
> #define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW (1<<5)
> -/** Host Interrupt Status bit : I/O read FIFO underflow */
> +/* Host Interrupt Status bit : I/O read FIFO underflow */
> #define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW (1<<6)
> -/** Host Interrupt Status bit : Data write FIFO overflow */
> +/* Host Interrupt Status bit : Data write FIFO overflow */
> #define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW (1<<7)
> -/** Host Interrupt Status bit : Data read FIFO underflow */
> +/* Host Interrupt Status bit : Data read FIFO underflow */
> #define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW (1<<8)
> -/** Host Interrupt Status bit : Command write FIFO overflow */
> +/* Host Interrupt Status bit : Command write FIFO overflow */
> #define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW (1<<9)
> -/** Host Interrupt Status bit : Command read FIFO underflow */
> +/* Host Interrupt Status bit : Command read FIFO underflow */
> #define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW (1<<10)
>
> /***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/
> -/** Host Interrupt Status Mask bit : Tx download ready */
> +/* Host Interrupt Status Mask bit : Tx download ready */
> #define IF_SPI_HISM_TX_DOWNLOAD_RDY (1<<0)
> -/** Host Interrupt Status Mask bit : Rx upload ready */
> +/* Host Interrupt Status Mask bit : Rx upload ready */
> #define IF_SPI_HISM_RX_UPLOAD_RDY (1<<1)
> -/** Host Interrupt Status Mask bit : Command download ready */
> +/* Host Interrupt Status Mask bit : Command download ready */
> #define IF_SPI_HISM_CMD_DOWNLOAD_RDY (1<<2)
> -/** Host Interrupt Status Mask bit : Card event */
> +/* Host Interrupt Status Mask bit : Card event */
> #define IF_SPI_HISM_CARDEVENT (1<<3)
> -/** Host Interrupt Status Mask bit : Command upload ready */
> +/* Host Interrupt Status Mask bit : Command upload ready */
> #define IF_SPI_HISM_CMD_UPLOAD_RDY (1<<4)
> -/** Host Interrupt Status Mask bit : I/O write FIFO overflow */
> +/* Host Interrupt Status Mask bit : I/O write FIFO overflow */
> #define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW (1<<5)
> -/** Host Interrupt Status Mask bit : I/O read FIFO underflow */
> +/* Host Interrupt Status Mask bit : I/O read FIFO underflow */
> #define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW (1<<6)
> -/** Host Interrupt Status Mask bit : Data write FIFO overflow */
> +/* Host Interrupt Status Mask bit : Data write FIFO overflow */
> #define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW (1<<7)
> -/** Host Interrupt Status Mask bit : Data write FIFO underflow */
> +/* Host Interrupt Status Mask bit : Data write FIFO underflow */
> #define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW (1<<8)
> -/** Host Interrupt Status Mask bit : Command write FIFO overflow */
> +/* Host Interrupt Status Mask bit : Command write FIFO overflow */
> #define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW (1<<9)
> -/** Host Interrupt Status Mask bit : Command write FIFO underflow */
> +/* Host Interrupt Status Mask bit : Command write FIFO underflow */
> #define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW (1<<10)
>
> /***************** IF_SPI_SPU_BUS_MODE_REG *****************/
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/if_usb.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/if_usb.h
> @@ -6,9 +6,9 @@
>
> struct lbs_private;
>
> -/**
> - * This file contains definition for USB interface.
> - */
> +/*
> + * This file contains definition for USB interface.
> + */
> #define CMD_TYPE_REQUEST 0xF00DFACE
> #define CMD_TYPE_DATA 0xBEADC0DE
> #define CMD_TYPE_INDICATION 0xBEEFFACE
> @@ -40,7 +40,7 @@ struct bootcmdresp
> uint8_t pad[2];
> };
>
> -/** USB card description structure*/
> +/* USB card description structure*/
> struct if_usb_card {
> struct usb_device *udev;
> uint32_t model; /* MODEL_* */
> @@ -77,7 +77,7 @@ struct if_usb_card {
> __le16 boot2_version;
> };
>
> -/** fwheader */
> +/* fwheader */
> struct fwheader {
> __le32 dnldcmd;
> __le32 baseaddr;
> @@ -86,14 +86,14 @@ struct fwheader {
> };
>
> #define FW_MAX_DATA_BLK_SIZE 600
> -/** FWData */
> +/* FWData */
> struct fwdata {
> struct fwheader hdr;
> __le32 seqnum;
> uint8_t data[0];
> };
>
> -/** fwsyncheader */
> +/* fwsyncheader */
> struct fwsyncheader {
> __le32 cmd;
> __le32 seqnum;
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/mesh.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/mesh.h
> @@ -1,6 +1,6 @@
> -/**
> - * Contains all definitions needed for the Libertas' MESH implementation.
> - */
> +/*
> + * Contains all definitions needed for the Libertas' MESH implementation.
> + */
> #ifndef _LBS_MESH_H_
> #define _LBS_MESH_H_
>
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/types.h
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/types.h
> @@ -1,6 +1,6 @@
> -/**
> - * This header file contains definition for global types
> - */
> +/*
> + * This header file contains definition for global types
> + */
> #ifndef _LBS_TYPES_H_
> #define _LBS_TYPES_H_
>
> @@ -54,7 +54,7 @@ union ieee_phy_param_set {
> struct ieee_ie_ds_param_set ds;
> } __packed;
>
> -/** TLV type ID definition */
> +/* TLV type ID definition */
> #define PROPRIETARY_TLV_BASE_ID 0x0100
>
> /* Terminating TLV type */
> @@ -96,7 +96,7 @@ union ieee_phy_param_set {
> #define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37)
> #define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291)
>
> -/** TLV related data structures*/
> +/* TLV related data structures */
> struct mrvl_ie_header {
> __le16 type;
> __le16 len;
> @@ -177,7 +177,7 @@ struct mrvl_ie_auth_type {
> __le16 auth;
> } __packed;
>
> -/** Local Power capability */
> +/* Local Power capability */
> struct mrvl_ie_power_capability {
> struct mrvl_ie_header header;
> s8 minpower;
> @@ -235,9 +235,11 @@ struct mrvl_ie_ledbhv {
> struct led_bhv ledbhv[1];
> } __packed;
>
> -/* Meant to be packed as the value member of a struct ieee80211_info_element.
> +/*
> + * Meant to be packed as the value member of a struct ieee80211_info_element.
> * Note that the len member of the ieee80211_info_element varies depending on
> - * the mesh_id_len */
> + * the mesh_id_len
> + */
> struct mrvl_meshie_val {
> uint8_t oui[3];
> uint8_t type;
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/cfg.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/cfg.c
> @@ -122,8 +122,10 @@ static u8 lbs_auth_to_authtype(enum nl80
> }
>
>
> -/* Various firmware commands need the list of supported rates, but with
> - the hight-bit set for basic rates */
> +/*
> + * Various firmware commands need the list of supported rates, but with
> + * the hight-bit set for basic rates
> + */
> static int lbs_add_rates(u8 *rates)
> {
> size_t i;
> @@ -425,7 +427,7 @@ static int lbs_add_wpa_tlv(u8 *tlv, cons
> return ie_len + 2;
> }
>
> -/***************************************************************************
> +/*
> * Set Channel
> */
>
> @@ -452,7 +454,7 @@ static int lbs_cfg_set_channel(struct wi
>
>
>
> -/***************************************************************************
> +/*
> * Scanning
> */
>
> @@ -538,8 +540,10 @@ static int lbs_ret_scan(struct lbs_priva
> goto done;
> }
>
> - /* Validity check: the TLV holds TSF values with 8 bytes each, so
> - * the size in the TLV must match the nr_sets value */
> + /*
> + * Validity check: the TLV holds TSF values with 8 bytes each, so
> + * the size in the TLV must match the nr_sets value
> + */
> i = get_unaligned_le16(tsfdesc);
> tsfdesc += 2;
> if (i / 8 != scanresp->nr_sets) {
> @@ -581,8 +585,10 @@ static int lbs_ret_scan(struct lbs_priva
>
> /* To find out the channel, we must parse the IEs */
> ie = pos;
> - /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
> - interval, capabilities */
> + /*
> + * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
> + * interval, capabilities
> + */
> ielen = left = len - (6 + 1 + 8 + 2 + 2);
> while (left >= 2) {
> u8 id, elen;
> @@ -790,7 +796,7 @@ static int lbs_cfg_scan(struct wiphy *wi
>
>
>
> -/***************************************************************************
> +/*
> * Events
> */
>
> @@ -825,7 +831,7 @@ void lbs_send_mic_failureevent(struct lb
>
>
>
> -/***************************************************************************
> +/*
> * Connect/disconnect
> */
>
> @@ -950,8 +956,10 @@ static int lbs_enable_rsn(struct lbs_pri
> * Set WPA/WPA key material
> */
>
> -/* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
> - * get rid of WEXT, this should go into host.h */
> +/*
> + * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
> + * get rid of WEXT, this should go into host.h
> + */
>
> struct cmd_key_material {
> struct cmd_header hdr;
> @@ -1536,7 +1544,7 @@ static int lbs_cfg_del_key(struct wiphy
> }
>
>
> -/***************************************************************************
> +/*
> * Get station
> */
>
> @@ -1581,7 +1589,7 @@ static int lbs_cfg_get_station(struct wi
>
>
>
> -/***************************************************************************
> +/*
> * "Site survey", here just current channel and noise level
> */
>
> @@ -1614,7 +1622,7 @@ static int lbs_get_survey(struct wiphy *
>
>
>
> -/***************************************************************************
> +/*
> * Change interface
> */
>
> @@ -1656,11 +1664,12 @@ static int lbs_change_intf(struct wiphy
>
>
>
> -/***************************************************************************
> +/*
> * IBSS (Ad-Hoc)
> */
>
> -/* The firmware needs the following bits masked out of the beacon-derived
> +/*
> + * The firmware needs the following bits masked out of the beacon-derived
> * capability field when associating/joining to a BSS:
> * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
> */
> @@ -1999,7 +2008,7 @@ static int lbs_leave_ibss(struct wiphy *
>
>
>
> -/***************************************************************************
> +/*
> * Initialization
> */
>
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/cmd.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/cmd.c
> @@ -1,7 +1,7 @@
> -/**
> - * This file contains the handling of command.
> - * It prepares command and sends it to firmware when it is ready.
> - */
> +/*
> + * This file contains the handling of command.
> + * It prepares command and sends it to firmware when it is ready.
> + */
>
> #include <linux/kfifo.h>
> #include <linux/sched.h>
> @@ -16,14 +16,14 @@
> #define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf)))
>
> /**
> - * @brief Simple callback that copies response back into command
> + * lbs_cmd_copyback - Simple callback that copies response back into command
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param extra A pointer to the original command structure for which
> - * 'resp' is a response
> - * @param resp A pointer to the command response
> + * @priv: A pointer to &struct lbs_private structure
> + * @extra: A pointer to the original command structure for which
> + * 'resp' is a response
> + * @resp: A pointer to the command response
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
> struct cmd_header *resp)
> @@ -38,15 +38,15 @@ int lbs_cmd_copyback(struct lbs_private
> EXPORT_SYMBOL_GPL(lbs_cmd_copyback);
>
> /**
> - * @brief Simple callback that ignores the result. Use this if
> - * you just want to send a command to the hardware, but don't
> + * lbs_cmd_async_callback - Simple callback that ignores the result.
> + * Use this if you just want to send a command to the hardware, but don't
> * care for the result.
> *
> - * @param priv ignored
> - * @param extra ignored
> - * @param resp ignored
> + * @priv: ignored
> + * @extra: ignored
> + * @resp: ignored
> *
> - * @return 0 for success
> + * returns: 0 for success
> */
> static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra,
> struct cmd_header *resp)
> @@ -56,10 +56,11 @@ static int lbs_cmd_async_callback(struct
>
>
> /**
> - * @brief Checks whether a command is allowed in Power Save mode
> + * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode
> + *
> + * @cmd: the command ID
> *
> - * @param command the command ID
> - * @return 1 if allowed, 0 if not allowed
> + * returns: 1 if allowed, 0 if not allowed
> */
> static u8 is_command_allowed_in_ps(u16 cmd)
> {
> @@ -75,11 +76,12 @@ static u8 is_command_allowed_in_ps(u16 c
> }
>
> /**
> - * @brief Updates the hardware details like MAC address and regulatory region
> + * lbs_update_hw_spec - Updates the hardware details like MAC address
> + * and regulatory region
> *
> - * @param priv A pointer to struct lbs_private structure
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_update_hw_spec(struct lbs_private *priv)
> {
> @@ -217,14 +219,14 @@ int lbs_host_sleep_cfg(struct lbs_privat
> EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg);
>
> /**
> - * @brief Sets the Power Save mode
> + * lbs_set_ps_mode - Sets the Power Save mode
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param cmd_action The Power Save operation (PS_MODE_ACTION_ENTER_PS or
> + * @priv: A pointer to &struct lbs_private structure
> + * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or
> * PS_MODE_ACTION_EXIT_PS)
> - * @param block Whether to block on a response or not
> + * @block: Whether to block on a response or not
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block)
> {
> @@ -417,13 +419,13 @@ int lbs_set_host_sleep(struct lbs_privat
> }
>
> /**
> - * @brief Set an SNMP MIB value
> + * lbs_set_snmp_mib - Set an SNMP MIB value
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param oid The OID to set in the firmware
> - * @param val Value to set the OID to
> + * @priv: A pointer to &struct lbs_private structure
> + * @oid: The OID to set in the firmware
> + * @val: Value to set the OID to
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val)
> {
> @@ -467,13 +469,13 @@ out:
> }
>
> /**
> - * @brief Get an SNMP MIB value
> + * lbs_get_snmp_mib - Get an SNMP MIB value
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param oid The OID to retrieve from the firmware
> - * @param out_val Location for the returned value
> + * @priv: A pointer to &struct lbs_private structure
> + * @oid: The OID to retrieve from the firmware
> + * @out_val: Location for the returned value
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val)
> {
> @@ -510,14 +512,14 @@ out:
> }
>
> /**
> - * @brief Get the min, max, and current TX power
> + * lbs_get_tx_power - Get the min, max, and current TX power
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param curlevel Current power level in dBm
> - * @param minlevel Minimum supported power level in dBm (optional)
> - * @param maxlevel Maximum supported power level in dBm (optional)
> + * @priv: A pointer to &struct lbs_private structure
> + * @curlevel: Current power level in dBm
> + * @minlevel: Minimum supported power level in dBm (optional)
> + * @maxlevel: Maximum supported power level in dBm (optional)
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
> s16 *maxlevel)
> @@ -545,12 +547,12 @@ int lbs_get_tx_power(struct lbs_private
> }
>
> /**
> - * @brief Set the TX power
> + * lbs_set_tx_power - Set the TX power
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param dbm The desired power level in dBm
> + * @priv: A pointer to &struct lbs_private structure
> + * @dbm: The desired power level in dBm
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_set_tx_power(struct lbs_private *priv, s16 dbm)
> {
> @@ -573,12 +575,13 @@ int lbs_set_tx_power(struct lbs_private
> }
>
> /**
> - * @brief Enable or disable monitor mode (only implemented on OLPC usb8388 FW)
> + * lbs_set_monitor_mode - Enable or disable monitor mode
> + * (only implemented on OLPC usb8388 FW)
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param enable 1 to enable monitor mode, 0 to disable
> + * @priv: A pointer to &struct lbs_private structure
> + * @enable: 1 to enable monitor mode, 0 to disable
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_set_monitor_mode(struct lbs_private *priv, int enable)
> {
> @@ -604,11 +607,11 @@ int lbs_set_monitor_mode(struct lbs_priv
> }
>
> /**
> - * @brief Get the radio channel
> + * lbs_get_channel - Get the radio channel
> *
> - * @param priv A pointer to struct lbs_private structure
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @return The channel on success, error on failure
> + * returns: The channel on success, error on failure
> */
> static int lbs_get_channel(struct lbs_private *priv)
> {
> @@ -650,12 +653,12 @@ int lbs_update_channel(struct lbs_privat
> }
>
> /**
> - * @brief Set the radio channel
> + * lbs_set_channel - Set the radio channel
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param channel The desired channel, or 0 to clear a locked channel
> + * @priv: A pointer to &struct lbs_private structure
> + * @channel: The desired channel, or 0 to clear a locked channel
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_set_channel(struct lbs_private *priv, u8 channel)
> {
> @@ -686,12 +689,13 @@ out:
> }
>
> /**
> - * @brief Get current RSSI and noise floor
> + * lbs_get_rssi - Get current RSSI and noise floor
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param rssi On successful return, signal level in mBm
> + * @priv: A pointer to &struct lbs_private structure
> + * @rssi: On successful return, signal level in mBm
> + * @nf: On successful return, Noise floor
> *
> - * @return The channel on success, error on failure
> + * returns: The channel on success, error on failure
> */
> int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf)
> {
> @@ -719,13 +723,14 @@ int lbs_get_rssi(struct lbs_private *pri
> }
>
> /**
> - * @brief Send regulatory and 802.11d domain information to the firmware
> + * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information
> + * to the firmware
> *
> - * @param priv pointer to struct lbs_private
> - * @param request cfg80211 regulatory request structure
> - * @param bands the device's supported bands and channels
> + * @priv: pointer to &struct lbs_private
> + * @request: cfg80211 regulatory request structure
> + * @bands: the device's supported bands and channels
> *
> - * @return 0 on success, error code on failure
> + * returns: 0 on success, error code on failure
> */
> int lbs_set_11d_domain_info(struct lbs_private *priv,
> struct regulatory_request *request,
> @@ -842,15 +847,15 @@ int lbs_set_11d_domain_info(struct lbs_p
> }
>
> /**
> - * @brief Read a MAC, Baseband, or RF register
> + * lbs_get_reg - Read a MAC, Baseband, or RF register
> *
> - * @param priv pointer to struct lbs_private
> - * @param cmd register command, one of CMD_MAC_REG_ACCESS,
> - * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
> - * @param offset byte offset of the register to get
> - * @param value on success, the value of the register at 'offset'
> + * @priv: pointer to &struct lbs_private
> + * @reg: register command, one of CMD_MAC_REG_ACCESS,
> + * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
> + * @offset: byte offset of the register to get
> + * @value: on success, the value of the register at 'offset'
> *
> - * @return 0 on success, error code on failure
> + * returns: 0 on success, error code on failure
> */
> int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value)
> {
> @@ -886,15 +891,15 @@ out:
> }
>
> /**
> - * @brief Write a MAC, Baseband, or RF register
> + * lbs_set_reg - Write a MAC, Baseband, or RF register
> *
> - * @param priv pointer to struct lbs_private
> - * @param cmd register command, one of CMD_MAC_REG_ACCESS,
> - * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
> - * @param offset byte offset of the register to set
> - * @param value the value to write to the register at 'offset'
> + * @priv: pointer to &struct lbs_private
> + * @reg: register command, one of CMD_MAC_REG_ACCESS,
> + * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
> + * @offset: byte offset of the register to set
> + * @value: the value to write to the register at 'offset'
> *
> - * @return 0 on success, error code on failure
> + * returns: 0 on success, error code on failure
> */
> int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value)
> {
> @@ -1023,7 +1028,7 @@ static void lbs_submit_command(struct lb
> lbs_deb_leave(LBS_DEB_HOST);
> }
>
> -/**
> +/*
> * This function inserts command node to cmdfreeq
> * after cleans it. Requires priv->driver_lock held.
> */
> @@ -1125,11 +1130,12 @@ void lbs_set_mac_control(struct lbs_priv
> }
>
> /**
> - * @brief This function allocates the command buffer and link
> - * it to command free queue.
> + * lbs_allocate_cmd_buffer - allocates the command buffer and links
> + * it to command free queue
> + *
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return 0 or -1
> + * returns: 0 for success or -1 on error
> */
> int lbs_allocate_cmd_buffer(struct lbs_private *priv)
> {
> @@ -1171,10 +1177,11 @@ done:
> }
>
> /**
> - * @brief This function frees the command buffer.
> + * lbs_free_cmd_buffer - free the command buffer
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return 0 or -1
> + * @priv: A pointer to &struct lbs_private structure
> + *
> + * returns: 0 for success
> */
> int lbs_free_cmd_buffer(struct lbs_private *priv)
> {
> @@ -1211,11 +1218,13 @@ done:
> }
>
> /**
> - * @brief This function gets a free command node if available in
> - * command free queue.
> + * lbs_get_free_cmd_node - gets a free command node if available in
> + * command free queue
> + *
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return cmd_ctrl_node A pointer to cmd_ctrl_node structure or NULL
> + * returns: A pointer to &cmd_ctrl_node structure on success
> + * or %NULL on error
> */
> static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv)
> {
> @@ -1245,12 +1254,12 @@ static struct cmd_ctrl_node *lbs_get_fre
> }
>
> /**
> - * @brief This function executes next command in command
> - * pending queue. It will put firmware back to PS mode
> - * if applicable.
> + * lbs_execute_next_command - execute next command in command
> + * pending queue. Will put firmware back to PS mode if applicable.
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return 0 or -1
> + * @priv: A pointer to &struct lbs_private structure
> + *
> + * returns: 0 on success or -1 on error
> */
> int lbs_execute_next_command(struct lbs_private *priv)
> {
> @@ -1454,12 +1463,12 @@ out:
> }
>
> /**
> - * @brief This function checks condition and prepares to
> - * send sleep confirm command to firmware if ok.
> + * lbs_ps_confirm_sleep - checks condition and prepares to
> + * send sleep confirm command to firmware if ok
> + *
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param psmode Power Saving mode
> - * @return n/a
> + * returns: n/a
> */
> void lbs_ps_confirm_sleep(struct lbs_private *priv)
> {
> @@ -1499,16 +1508,16 @@ void lbs_ps_confirm_sleep(struct lbs_pri
>
>
> /**
> - * @brief Configures the transmission power control functionality.
> + * lbs_set_tpc_cfg - Configures the transmission power control functionality
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param enable Transmission power control enable
> - * @param p0 Power level when link quality is good (dBm).
> - * @param p1 Power level when link quality is fair (dBm).
> - * @param p2 Power level when link quality is poor (dBm).
> - * @param usesnr Use Signal to Noise Ratio in TPC
> + * @priv: A pointer to &struct lbs_private structure
> + * @enable: Transmission power control enable
> + * @p0: Power level when link quality is good (dBm).
> + * @p1: Power level when link quality is fair (dBm).
> + * @p2: Power level when link quality is poor (dBm).
> + * @usesnr: Use Signal to Noise Ratio in TPC
> *
> - * @return 0 on success
> + * returns: 0 on success
> */
> int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
> int8_t p2, int usesnr)
> @@ -1531,15 +1540,15 @@ int lbs_set_tpc_cfg(struct lbs_private *
> }
>
> /**
> - * @brief Configures the power adaptation settings.
> + * lbs_set_power_adapt_cfg - Configures the power adaptation settings
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param enable Power adaptation enable
> - * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
> - * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
> - * @param p2 Power level for 48 and 54 Mbps (dBm).
> + * @priv: A pointer to &struct lbs_private structure
> + * @enable: Power adaptation enable
> + * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm).
> + * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
> + * @p2: Power level for 48 and 54 Mbps (dBm).
> *
> - * @return 0 on Success
> + * returns: 0 on Success
> */
>
> int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/cmdresp.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/cmdresp.c
> @@ -1,7 +1,7 @@
> -/**
> - * This file contains the handling of command
> - * responses as well as events generated by firmware.
> - */
> +/*
> + * This file contains the handling of command
> + * responses as well as events generated by firmware.
> + */
> #include <linux/slab.h>
> #include <linux/delay.h>
> #include <linux/sched.h>
> @@ -12,12 +12,13 @@
> #include "cmd.h"
>
> /**
> - * @brief This function handles disconnect event. it
> - * reports disconnect to upper layer, clean tx/rx packets,
> - * reset link state etc.
> + * lbs_mac_event_disconnected - handles disconnect event. It
> + * reports disconnect to upper layer, clean tx/rx packets,
> + * reset link state etc.
> + *
> + * @priv: A pointer to struct lbs_private structure
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return n/a
> + * returns: n/a
> */
> void lbs_mac_event_disconnected(struct lbs_private *priv)
> {
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/debugfs.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/debugfs.c
> @@ -849,15 +849,14 @@ static struct debug_data items[] = {
> static int num_of_items = ARRAY_SIZE(items);
>
> /**
> - * @brief proc read function
> + * lbs_debugfs_read - proc read function
> *
> - * @param page pointer to buffer
> - * @param s read data starting position
> - * @param off offset
> - * @param cnt counter
> - * @param eof end of file flag
> - * @param data data to output
> - * @return number of output data
> + * @file: file to read
> + * @userbuf: pointer to buffer
> + * @count: number of bytes to read
> + * @ppos: read data starting position
> + *
> + * returns: amount of data read or negative error code
> */
> static ssize_t lbs_debugfs_read(struct file *file, char __user *userbuf,
> size_t count, loff_t *ppos)
> @@ -897,13 +896,14 @@ static ssize_t lbs_debugfs_read(struct f
> }
>
> /**
> - * @brief proc write function
> + * lbs_debugfs_write - proc write function
> + *
> + * @f: file pointer
> + * @buf: pointer to data buffer
> + * @cnt: data number to write
> + * @ppos: file position
> *
> - * @param f file pointer
> - * @param buf pointer to data buffer
> - * @param cnt data number to write
> - * @param data data to write
> - * @return number of data
> + * returns: amount of data written
> */
> static ssize_t lbs_debugfs_write(struct file *f, const char __user *buf,
> size_t cnt, loff_t *ppos)
> @@ -966,11 +966,11 @@ static const struct file_operations lbs_
> };
>
> /**
> - * @brief create debug proc file
> + * lbs_debug_init - create debug proc file
> + *
> + * @priv: pointer to &struct lbs_private
> *
> - * @param priv pointer struct lbs_private
> - * @param dev pointer net_device
> - * @return N/A
> + * returns: N/A
> */
> static void lbs_debug_init(struct lbs_private *priv)
> {
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/ethtool.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/ethtool.c
> @@ -20,7 +20,8 @@ static void lbs_ethtool_get_drvinfo(stru
> strcpy(info->version, lbs_driver_version);
> }
>
> -/* All 8388 parts have 16KiB EEPROM size at the time of writing.
> +/*
> + * All 8388 parts have 16KiB EEPROM size at the time of writing.
> * In case that changes this needs fixing.
> */
> #define LBS_EEPROM_LEN 16384
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/if_cs.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/if_cs.c
> @@ -312,7 +312,8 @@ static int if_cs_poll_while_fw_download(
> #define CF8385_MANFID 0x02df
> #define CF8385_CARDID 0x8103
>
> -/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
> +/*
> + * FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
> * that gets fixed. Currently there's no way to access it from the probe hook.
> */
> static inline u32 get_model(u16 manf_id, u16 card_id)
> @@ -621,8 +622,10 @@ static int if_cs_prog_helper(struct if_c
> if (remain < count)
> count = remain;
>
> - /* "write the number of bytes to be sent to the I/O Command
> - * write length register" */
> + /*
> + * "write the number of bytes to be sent to the I/O Command
> + * write length register"
> + */
> if_cs_write16(card, IF_CS_CMD_LEN, count);
>
> /* "write this to I/O Command port register as 16 bit writes */
> @@ -631,16 +634,22 @@ static int if_cs_prog_helper(struct if_c
> &fw->data[sent],
> count >> 1);
>
> - /* "Assert the download over interrupt command in the Host
> - * status register" */
> + /*
> + * "Assert the download over interrupt command in the Host
> + * status register"
> + */
> if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
>
> - /* "Assert the download over interrupt command in the Card
> - * interrupt case register" */
> + /*
> + * "Assert the download over interrupt command in the Card
> + * interrupt case register"
> + */
> if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
>
> - /* "The host polls the Card Status register ... for 50 ms before
> - declaring a failure */
> + /*
> + * "The host polls the Card Status register ... for 50 ms before
> + * declaring a failure"
> + */
> ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
> IF_CS_BIT_COMMAND);
> if (ret < 0) {
> @@ -841,7 +850,7 @@ static int if_cs_probe(struct pcmcia_dev
>
> /*
> * Most of the libertas cards can do unaligned register access, but some
> - * weird ones can not. That's especially true for the CF8305 card.
> + * weird ones cannot. That's especially true for the CF8305 card.
> */
> card->align_regs = 0;
>
> @@ -913,8 +922,10 @@ static int if_cs_probe(struct pcmcia_dev
> goto out3;
> }
>
> - /* Clear any interrupt cause that happened while sending
> - * firmware/initializing card */
> + /*
> + * Clear any interrupt cause that happened while sending
> + * firmware/initializing card
> + */
> if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
> if_cs_enable_ints(card);
>
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/if_spi.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/if_spi.c
> @@ -139,8 +139,10 @@ static void spu_transaction_finish(struc
> card->prev_xfer_time = jiffies;
> }
>
> -/* Write out a byte buffer to an SPI register,
> - * using a series of 16-bit transfers. */
> +/*
> + * Write out a byte buffer to an SPI register,
> + * using a series of 16-bit transfers.
> + */
> static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
> {
> int err = 0;
> @@ -204,8 +206,10 @@ static int spu_read(struct if_spi_card *
> struct spi_transfer dummy_trans;
> struct spi_transfer data_trans;
>
> - /* You must take an even number of bytes from the SPU, even if you
> - * don't care about the last one. */
> + /*
> + * You must take an even number of bytes from the SPU, even if you
> + * don't care about the last one.
> + */
> BUG_ON(len & 0x1);
>
> spu_transaction_init(card);
> @@ -254,8 +258,10 @@ static inline int spu_read_u16(struct if
> return ret;
> }
>
> -/* Read 32 bits from an SPI register.
> - * The low 16 bits are read first. */
> +/*
> + * Read 32 bits from an SPI register.
> + * The low 16 bits are read first.
> + */
> static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
> {
> __le32 buf;
> @@ -267,13 +273,15 @@ static int spu_read_u32(struct if_spi_ca
> return err;
> }
>
> -/* Keep reading 16 bits from an SPI register until you get the correct result.
> +/*
> + * Keep reading 16 bits from an SPI register until you get the correct result.
> *
> * If mask = 0, the correct result is any non-zero number.
> * If mask != 0, the correct result is any number where
> * number & target_mask == target
> *
> - * Returns -ETIMEDOUT if a second passes without the correct result. */
> + * Returns -ETIMEDOUT if a second passes without the correct result.
> + */
> static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
> u16 target_mask, u16 target)
> {
> @@ -301,8 +309,10 @@ static int spu_wait_for_u16(struct if_sp
> }
> }
>
> -/* Read 16 bits from an SPI register until you receive a specific value.
> - * Returns -ETIMEDOUT if a 4 tries pass without success. */
> +/*
> + * Read 16 bits from an SPI register until you receive a specific value.
> + * Returns -ETIMEDOUT if a 4 tries pass without success.
> + */
> static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
> {
> int err, try;
> @@ -324,8 +334,10 @@ static int spu_set_interrupt_mode(struct
> {
> int err = 0;
>
> - /* We can suppress a host interrupt by clearing the appropriate
> - * bit in the "host interrupt status mask" register */
> + /*
> + * We can suppress a host interrupt by clearing the appropriate
> + * bit in the "host interrupt status mask" register
> + */
> if (suppress_host_int) {
> err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
> if (err)
> @@ -341,10 +353,12 @@ static int spu_set_interrupt_mode(struct
> return err;
> }
>
> - /* If auto-interrupts are on, the completion of certain transactions
> + /*
> + * If auto-interrupts are on, the completion of certain transactions
> * will trigger an interrupt automatically. If auto-interrupts
> * are off, we need to set the "Card Interrupt Cause" register to
> - * trigger a card interrupt. */
> + * trigger a card interrupt.
> + */
> if (auto_int) {
> err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
> IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
> @@ -398,8 +412,10 @@ static int spu_init(struct if_spi_card *
> int err = 0;
> u32 delay;
>
> - /* We have to start up in timed delay mode so that we can safely
> - * read the Delay Read Register. */
> + /*
> + * We have to start up in timed delay mode so that we can safely
> + * read the Delay Read Register.
> + */
> card->use_dummy_writes = 0;
> err = spu_set_bus_mode(card,
> IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
> @@ -455,8 +471,10 @@ static int if_spi_prog_helper_firmware(s
>
> /* Load helper firmware image */
> while (bytes_remaining > 0) {
> - /* Scratch pad 1 should contain the number of bytes we
> - * want to download to the firmware */
> + /*
> + * Scratch pad 1 should contain the number of bytes we
> + * want to download to the firmware
> + */
> err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
> HELPER_FW_LOAD_CHUNK_SZ);
> if (err)
> @@ -468,8 +486,10 @@ static int if_spi_prog_helper_firmware(s
> if (err)
> goto out;
>
> - /* Feed the data into the command read/write port reg
> - * in chunks of 64 bytes */
> + /*
> + * Feed the data into the command read/write port reg
> + * in chunks of 64 bytes
> + */
> memset(temp, 0, sizeof(temp));
> memcpy(temp, fw,
> min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
> @@ -491,9 +511,11 @@ static int if_spi_prog_helper_firmware(s
> fw += HELPER_FW_LOAD_CHUNK_SZ;
> }
>
> - /* Once the helper / single stage firmware download is complete,
> + /*
> + * Once the helper / single stage firmware download is complete,
> * write 0 to scratch pad 1 and interrupt the
> - * bootloader. This completes the helper download. */
> + * bootloader. This completes the helper download.
> + */
> err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
> if (err)
> goto out;
> @@ -513,16 +535,20 @@ out:
> return err;
> }
>
> -/* Returns the length of the next packet the firmware expects us to send
> - * Sets crc_err if the previous transfer had a CRC error. */
> +/*
> + * Returns the length of the next packet the firmware expects us to send.
> + * Sets crc_err if the previous transfer had a CRC error.
> + */
> static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
> int *crc_err)
> {
> u16 len;
> int err = 0;
>
> - /* wait until the host interrupt status register indicates
> - * that we are ready to download */
> + /*
> + * wait until the host interrupt status register indicates
> + * that we are ready to download
> + */
> err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
> IF_SPI_HIST_CMD_DOWNLOAD_RDY,
> IF_SPI_HIST_CMD_DOWNLOAD_RDY);
> @@ -583,8 +609,10 @@ static int if_spi_prog_main_firmware(str
> goto out;
> }
> if (bytes < 0) {
> - /* If there are no more bytes left, we would normally
> - * expect to have terminated with len = 0 */
> + /*
> + * If there are no more bytes left, we would normally
> + * expect to have terminated with len = 0
> + */
> lbs_pr_err("Firmware load wants more bytes "
> "than we have to offer.\n");
> break;
> @@ -656,14 +684,18 @@ static int if_spi_c2h_cmd(struct if_spi_
> u16 len;
> u8 i;
>
> - /* We need a buffer big enough to handle whatever people send to
> - * hw_host_to_card */
> + /*
> + * We need a buffer big enough to handle whatever people send to
> + * hw_host_to_card
> + */
> BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
> BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);
>
> - /* It's just annoying if the buffer size isn't a multiple of 4, because
> - * then we might have len < IF_SPI_CMD_BUF_SIZE but
> - * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE */
> + /*
> + * It's just annoying if the buffer size isn't a multiple of 4, because
> + * then we might have len < IF_SPI_CMD_BUF_SIZE but
> + * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
> + */
> BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);
>
> lbs_deb_enter(LBS_DEB_SPI);
> @@ -834,8 +866,10 @@ static void if_spi_host_to_card_worker(s
>
> lbs_deb_enter(LBS_DEB_SPI);
>
> - /* Read the host interrupt status register to see what we
> - * can do. */
> + /*
> + * Read the host interrupt status register to see what we
> + * can do.
> + */
> err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
> &hiStatus);
> if (err) {
> @@ -854,12 +888,15 @@ static void if_spi_host_to_card_worker(s
> goto err;
> }
>
> - /* workaround: in PS mode, the card does not set the Command
> - * Download Ready bit, but it sets TX Download Ready. */
> + /*
> + * workaround: in PS mode, the card does not set the Command
> + * Download Ready bit, but it sets TX Download Ready.
> + */
> if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
> (card->priv->psstate != PS_STATE_FULL_POWER &&
> (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
> - /* This means two things. First of all,
> + /*
> + * This means two things. First of all,
> * if there was a previous command sent, the card has
> * successfully received it.
> * Secondly, it is now ready to download another
> @@ -867,8 +904,7 @@ static void if_spi_host_to_card_worker(s
> */
> lbs_host_to_card_done(card->priv);
>
> - /* Do we have any command packets from the host to
> - * send? */
> + /* Do we have any command packets from the host to send? */
> packet = NULL;
> spin_lock_irqsave(&card->buffer_lock, flags);
> if (!list_empty(&card->cmd_packet_list)) {
> @@ -882,8 +918,7 @@ static void if_spi_host_to_card_worker(s
> if_spi_h2c(card, packet, MVMS_CMD);
> }
> if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
> - /* Do we have any data packets from the host to
> - * send? */
> + /* Do we have any data packets from the host to send? */
> packet = NULL;
> spin_lock_irqsave(&card->buffer_lock, flags);
> if (!list_empty(&card->data_packet_list)) {
> @@ -910,7 +945,8 @@ err:
> * Host to Card
> *
> * Called from Libertas to transfer some data to the WLAN device
> - * We can't sleep here. */
> + * We can't sleep here.
> + */
> static int if_spi_host_to_card(struct lbs_private *priv,
> u8 type, u8 *buf, u16 nb)
> {
> @@ -1099,8 +1135,10 @@ static int __devinit if_spi_probe(struct
> if (err)
> goto free_card;
>
> - /* Register our card with libertas.
> - * This will call alloc_etherdev */
> + /*
> + * Register our card with libertas.
> + * This will call alloc_etherdev.
> + */
> priv = lbs_add_card(card, &spi->dev);
> if (!priv) {
> err = -ENOMEM;
> @@ -1125,9 +1163,11 @@ static int __devinit if_spi_probe(struct
> goto terminate_workqueue;
> }
>
> - /* Start the card.
> + /*
> + * Start the card.
> * This will call register_netdev, and we'll start
> - * getting interrupts... */
> + * getting interrupts...
> + */
> err = lbs_start_card(priv);
> if (err)
> goto release_irq;
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/if_usb.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/if_usb.c
> @@ -1,6 +1,6 @@
> -/**
> - * This file contains functions used in USB interface module.
> - */
> +/*
> + * This file contains functions used in USB interface module.
> + */
> #include <linux/delay.h>
> #include <linux/moduleparam.h>
> #include <linux/firmware.h>
> @@ -66,7 +66,7 @@ static int if_usb_reset_device(struct if
>
> /* sysfs hooks */
>
> -/**
> +/*
> * Set function to write firmware to device's persistent memory
> */
> static ssize_t if_usb_firmware_set(struct device *dev,
> @@ -85,7 +85,7 @@ static ssize_t if_usb_firmware_set(struc
> return ret;
> }
>
> -/**
> +/*
> * lbs_flash_fw attribute to be exported per ethX interface through sysfs
> * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
> * the device's persistent memory:
> @@ -94,7 +94,14 @@ static ssize_t if_usb_firmware_set(struc
> static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
>
> /**
> - * Set function to write firmware to device's persistent memory
> + * if_usb_boot2_set - write firmware to device's persistent memory
> + *
> + * @dev: target device
> + * @attr: device attributes
> + * @buf: firmware buffer to write
> + * @count: number of bytes to write
> + *
> + * returns: number of bytes written or negative error code
> */
> static ssize_t if_usb_boot2_set(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> @@ -112,7 +119,7 @@ static ssize_t if_usb_boot2_set(struct d
> return ret;
> }
>
> -/**
> +/*
> * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
> * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
> * to the device's persistent memory:
> @@ -121,9 +128,10 @@ static ssize_t if_usb_boot2_set(struct d
> static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
>
> /**
> - * @brief call back function to handle the status of the URB
> - * @param urb pointer to urb structure
> - * @return N/A
> + * if_usb_write_bulk_callback - callback function to handle the status
> + * of the URB
> + * @urb: pointer to &urb structure
> + * returns: N/A
> */
> static void if_usb_write_bulk_callback(struct urb *urb)
> {
> @@ -150,9 +158,9 @@ static void if_usb_write_bulk_callback(s
> }
>
> /**
> - * @brief free tx/rx urb, skb and rx buffer
> - * @param cardp pointer if_usb_card
> - * @return N/A
> + * if_usb_free - free tx/rx urb, skb and rx buffer
> + * @cardp: pointer to &if_usb_card
> + * returns: N/A
> */
> static void if_usb_free(struct if_usb_card *cardp)
> {
> @@ -231,10 +239,10 @@ static void if_usb_reset_olpc_card(struc
> #endif
>
> /**
> - * @brief sets the configuration values
> - * @param ifnum interface number
> - * @param id pointer to usb_device_id
> - * @return 0 on success, error code on failure
> + * if_usb_probe - sets the configuration values
> + * @intf: &usb_interface pointer
> + * @id: pointer to usb_device_id
> + * returns: 0 on success, error code on failure
> */
> static int if_usb_probe(struct usb_interface *intf,
> const struct usb_device_id *id)
> @@ -366,9 +374,9 @@ error:
> }
>
> /**
> - * @brief free resource and cleanup
> - * @param intf USB interface structure
> - * @return N/A
> + * if_usb_disconnect - free resource and cleanup
> + * @intf: USB interface structure
> + * returns: N/A
> */
> static void if_usb_disconnect(struct usb_interface *intf)
> {
> @@ -398,9 +406,9 @@ static void if_usb_disconnect(struct usb
> }
>
> /**
> - * @brief This function download FW
> - * @param priv pointer to struct lbs_private
> - * @return 0
> + * if_usb_send_fw_pkt - download FW
> + * @cardp: pointer to &struct if_usb_card
> + * returns: 0
> */
> static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
> {
> @@ -486,11 +494,11 @@ static int if_usb_reset_device(struct if
> }
>
> /**
> - * @brief This function transfer the data to the device.
> - * @param priv pointer to struct lbs_private
> - * @param payload pointer to payload data
> - * @param nb data length
> - * @return 0 or -1
> + * usb_tx_block - transfer the data to the device
> + * @cardp: pointer to &struct if_usb_card
> + * @payload: pointer to payload data
> + * @nb: data length
> + * returns: 0 for success or negative error code
> */
> static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
> {
> @@ -727,11 +735,11 @@ static inline void process_cmdrequest(in
> }
>
> /**
> - * @brief This function reads of the packet into the upload buff,
> - * wake up the main thread and initialise the Rx callack.
> + * if_usb_receive - read the packet into the upload buffer,
> + * wake up the main thread and initialise the Rx callack
> *
> - * @param urb pointer to struct urb
> - * @return N/A
> + * @urb: pointer to &struct urb
> + * returns: N/A
> */
> static void if_usb_receive(struct urb *urb)
> {
> @@ -802,12 +810,12 @@ rx_exit:
> }
>
> /**
> - * @brief This function downloads data to FW
> - * @param priv pointer to struct lbs_private structure
> - * @param type type of data
> - * @param buf pointer to data buffer
> - * @param len number of bytes
> - * @return 0 or -1
> + * if_usb_host_to_card - downloads data to FW
> + * @priv: pointer to &struct lbs_private structure
> + * @type: type of data
> + * @payload: pointer to data buffer
> + * @nb: number of bytes
> + * returns: 0 for success or negative error code
> */
> static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
> uint8_t *payload, uint16_t nb)
> @@ -831,10 +839,11 @@ static int if_usb_host_to_card(struct lb
> }
>
> /**
> - * @brief This function issues Boot command to the Boot2 code
> - * @param ivalue 1:Boot from FW by USB-Download
> - * 2:Boot from FW in EEPROM
> - * @return 0
> + * if_usb_issue_boot_command - issues Boot command to the Boot2 code
> + * @cardp: pointer to &if_usb_card
> + * @ivalue: 1:Boot from FW by USB-Download
> + * 2:Boot from FW in EEPROM
> + * returns: 0 for success or negative error code
> */
> static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
> {
> @@ -853,11 +862,11 @@ static int if_usb_issue_boot_command(str
>
>
> /**
> - * @brief This function checks the validity of Boot2/FW image.
> + * check_fwfile_format - check the validity of Boot2/FW image
> *
> - * @param data pointer to image
> - * len image length
> - * @return 0 or -1
> + * @data: pointer to image
> + * @totlen: image length
> + * returns: 0 (good) or 1 (failure)
> */
> static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
> {
> @@ -901,13 +910,13 @@ static int check_fwfile_format(const uin
>
>
> /**
> -* @brief This function programs the firmware subject to cmd
> +* if_usb_prog_firmware - programs the firmware subject to cmd
> *
> -* @param cardp the if_usb_card descriptor
> -* fwname firmware or boot2 image file name
> -* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
> -* or BOOT_CMD_UPDATE_BOOT2.
> -* @return 0 or error code
> +* @cardp: the if_usb_card descriptor
> +* @fwname: firmware or boot2 image file name
> +* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
> +* or BOOT_CMD_UPDATE_BOOT2.
> +* returns: 0 or error code
> */
> static int if_usb_prog_firmware(struct if_usb_card *cardp,
> const char *fwname, int cmd)
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/main.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/main.c
> @@ -1,8 +1,8 @@
> -/**
> - * This file contains the major functions in WLAN
> - * driver. It includes init, exit, open, close and main
> - * thread etc..
> - */
> +/*
> + * This file contains the major functions in WLAN
> + * driver. It includes init, exit, open, close and main
> + * thread etc..
> + */
>
> #include <linux/moduleparam.h>
> #include <linux/delay.h>
> @@ -35,18 +35,20 @@ EXPORT_SYMBOL_GPL(lbs_debug);
> module_param_named(libertas_debug, lbs_debug, int, 0644);
>
>
> -/* This global structure is used to send the confirm_sleep command as
> - * fast as possible down to the firmware. */
> +/*
> + * This global structure is used to send the confirm_sleep command as
> + * fast as possible down to the firmware.
> + */
> struct cmd_confirm_sleep confirm_sleep;
>
>
> -/**
> +/*
> * the table to keep region code
> */
> u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
> { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
>
> -/**
> +/*
> * FW rate table. FW refers to rates by their index in this table, not by the
> * rate value itself. Values of 0x00 are
> * reserved positions.
> @@ -57,10 +59,10 @@ static u8 fw_data_rates[MAX_RATES] =
> };
>
> /**
> - * @brief use index to get the data rate
> + * lbs_fw_index_to_data_rate - use index to get the data rate
> *
> - * @param idx The index of data rate
> - * @return data rate or 0
> + * @idx: The index of data rate
> + * returns: data rate or 0
> */
> u32 lbs_fw_index_to_data_rate(u8 idx)
> {
> @@ -70,10 +72,10 @@ u32 lbs_fw_index_to_data_rate(u8 idx)
> }
>
> /**
> - * @brief use rate to get the index
> + * lbs_data_rate_to_fw_index - use rate to get the index
> *
> - * @param rate data rate
> - * @return index or 0
> + * @rate: data rate
> + * returns: index or 0
> */
> u8 lbs_data_rate_to_fw_index(u32 rate)
> {
> @@ -91,10 +93,10 @@ u8 lbs_data_rate_to_fw_index(u32 rate)
>
>
> /**
> - * @brief This function opens the ethX interface
> + * lbs_dev_open - open the ethX interface
> *
> - * @param dev A pointer to net_device structure
> - * @return 0 or -EBUSY if monitor mode active
> + * @dev: A pointer to &net_device structure
> + * returns: 0 or -EBUSY if monitor mode active
> */
> static int lbs_dev_open(struct net_device *dev)
> {
> @@ -120,10 +122,10 @@ static int lbs_dev_open(struct net_devic
> }
>
> /**
> - * @brief This function closes the ethX interface
> + * lbs_eth_stop - close the ethX interface
> *
> - * @param dev A pointer to net_device structure
> - * @return 0
> + * @dev: A pointer to &net_device structure
> + * returns: 0
> */
> static int lbs_eth_stop(struct net_device *dev)
> {
> @@ -336,12 +338,12 @@ void lbs_set_multicast_list(struct net_d
> }
>
> /**
> - * @brief This function handles the major jobs in the LBS driver.
> + * lbs_thread - handles the major jobs in the LBS driver.
> * It handles all events generated by firmware, RX data received
> * from firmware and TX data sent from kernel.
> *
> - * @param data A pointer to lbs_thread structure
> - * @return 0
> + * @data: A pointer to &lbs_thread structure
> + * returns: 0
> */
> static int lbs_thread(void *data)
> {
> @@ -540,11 +542,11 @@ static int lbs_thread(void *data)
> }
>
> /**
> - * @brief This function gets the HW spec from the firmware and sets
> - * some basic parameters.
> + * lbs_setup_firmware - gets the HW spec from the firmware and sets
> + * some basic parameters
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @return 0 or -1
> + * @priv: A pointer to &struct lbs_private structure
> + * returns: 0 or -1
> */
> static int lbs_setup_firmware(struct lbs_private *priv)
> {
> @@ -630,8 +632,10 @@ int lbs_resume(struct lbs_private *priv)
> EXPORT_SYMBOL_GPL(lbs_resume);
>
> /**
> - * This function handles the timeout of command sending.
> - * It will re-send the same command again.
> + * lbs_cmd_timeout_handler - handles the timeout of command sending.
> + * It will re-send the same command again.
> + *
> + * @data: &struct lbs_private pointer
> */
> static void lbs_cmd_timeout_handler(unsigned long data)
> {
> @@ -655,8 +659,10 @@ out:
> }
>
> /**
> - * This function put the device back to deep sleep mode when timer expires
> - * and no activity (command, event, data etc.) is detected.
> + * auto_deepsleep_timer_fn - put the device back to deep sleep mode when
> + * timer expires and no activity (command, event, data etc.) is detected.
> + * @data: &struct lbs_private pointer
> + * returns: N/A
> */
> static void auto_deepsleep_timer_fn(unsigned long data)
> {
> @@ -792,11 +798,12 @@ static const struct net_device_ops lbs_n
> };
>
> /**
> - * @brief This function adds the card. it will probe the
> + * lbs_add_card - adds the card. It will probe the
> * card, allocate the lbs_priv and initialize the device.
> *
> - * @param card A pointer to card
> - * @return A pointer to struct lbs_private structure
> + * @card: A pointer to card
> + * @dmdev: A pointer to &struct device
> + * returns: A pointer to &struct lbs_private structure
> */
> struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
> {
> @@ -1057,19 +1064,19 @@ void lbs_notify_command_response(struct
> EXPORT_SYMBOL_GPL(lbs_notify_command_response);
>
> /**
> - * @brief Retrieves two-stage firmware
> + * lbs_get_firmware - Retrieves two-stage firmware
> *
> - * @param dev A pointer to device structure
> - * @param user_helper User-defined helper firmware file
> - * @param user_mainfw User-defined main firmware file
> - * @param card_model Bus-specific card model ID used to filter firmware table
> - * elements
> - * @param fw_table Table of firmware file names and device model numbers
> - * terminated by an entry with a NULL helper name
> - * @param helper On success, the helper firmware; caller must free
> - * @param mainfw On success, the main firmware; caller must free
> + * @dev: A pointer to &device structure
> + * @user_helper: User-defined helper firmware file
> + * @user_mainfw: User-defined main firmware file
> + * @card_model: Bus-specific card model ID used to filter firmware table
> + * elements
> + * @fw_table: Table of firmware file names and device model numbers
> + * terminated by an entry with a NULL helper name
> + * @helper: On success, the helper firmware; caller must free
> + * @mainfw: On success, the main firmware; caller must free
> *
> - * @return 0 on success, non-zero on failure
> + * returns: 0 on success, non-zero on failure
> */
> int lbs_get_firmware(struct device *dev, const char *user_helper,
> const char *user_mainfw, u32 card_model,
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/mesh.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/mesh.c
> @@ -16,12 +16,15 @@
> * Mesh sysfs support
> */
>
> -/**
> +/*
> * Attributes exported through sysfs
> */
>
> /**
> - * @brief Get function for sysfs attribute anycast_mask
> + * lbs_anycast_get - Get function for sysfs attribute anycast_mask
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t lbs_anycast_get(struct device *dev,
> struct device_attribute *attr, char * buf)
> @@ -40,7 +43,11 @@ static ssize_t lbs_anycast_get(struct de
> }
>
> /**
> - * @brief Set function for sysfs attribute anycast_mask
> + * lbs_anycast_set - Set function for sysfs attribute anycast_mask
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t lbs_anycast_set(struct device *dev,
> struct device_attribute *attr, const char * buf, size_t count)
> @@ -62,7 +69,10 @@ static ssize_t lbs_anycast_set(struct de
> }
>
> /**
> - * @brief Get function for sysfs attribute prb_rsp_limit
> + * lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -85,7 +95,11 @@ static ssize_t lbs_prb_rsp_limit_get(str
> }
>
> /**
> - * @brief Set function for sysfs attribute prb_rsp_limit
> + * lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> @@ -114,7 +128,10 @@ static ssize_t lbs_prb_rsp_limit_set(str
> }
>
> /**
> - * Get function for sysfs attribute mesh
> + * lbs_mesh_get - Get function for sysfs attribute mesh
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t lbs_mesh_get(struct device *dev,
> struct device_attribute *attr, char * buf)
> @@ -124,7 +141,11 @@ static ssize_t lbs_mesh_get(struct devic
> }
>
> /**
> - * Set function for sysfs attribute mesh
> + * lbs_mesh_set - Set function for sysfs attribute mesh
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t lbs_mesh_set(struct device *dev,
> struct device_attribute *attr, const char * buf, size_t count)
> @@ -151,19 +172,19 @@ static ssize_t lbs_mesh_set(struct devic
> return count;
> }
>
> -/**
> +/*
> * lbs_mesh attribute to be exported per ethX interface
> * through sysfs (/sys/class/net/ethX/lbs_mesh)
> */
> static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
>
> -/**
> +/*
> * anycast_mask attribute to be exported per mshX interface
> * through sysfs (/sys/class/net/mshX/anycast_mask)
> */
> static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
>
> -/**
> +/*
> * prb_rsp_limit attribute to be exported per mshX interface
> * through sysfs (/sys/class/net/mshX/prb_rsp_limit)
> */
> @@ -274,10 +295,10 @@ int lbs_deinit_mesh(struct lbs_private *
>
>
> /**
> - * @brief This function closes the mshX interface
> + * lbs_mesh_stop - close the mshX interface
> *
> - * @param dev A pointer to net_device structure
> - * @return 0
> + * @dev: A pointer to &net_device structure
> + * returns: 0
> */
> static int lbs_mesh_stop(struct net_device *dev)
> {
> @@ -301,10 +322,10 @@ static int lbs_mesh_stop(struct net_devi
> }
>
> /**
> - * @brief This function opens the mshX interface
> + * lbs_mesh_dev_open - open the mshX interface
> *
> - * @param dev A pointer to net_device structure
> - * @return 0 or -EBUSY if monitor mode active
> + * @dev: A pointer to &net_device structure
> + * returns: 0 or -EBUSY if monitor mode active
> */
> static int lbs_mesh_dev_open(struct net_device *dev)
> {
> @@ -342,10 +363,10 @@ static const struct net_device_ops mesh_
> };
>
> /**
> - * @brief This function adds mshX interface
> + * lbs_add_mesh - add mshX interface
> *
> - * @param priv A pointer to the struct lbs_private structure
> - * @return 0 if successful, -X otherwise
> + * @priv: A pointer to the &struct lbs_private structure
> + * returns: 0 if successful, -X otherwise
> */
> int lbs_add_mesh(struct lbs_private *priv)
> {
> @@ -456,13 +477,13 @@ void lbs_mesh_set_txpd(struct lbs_privat
> */
>
> /**
> - * @brief Add or delete Mesh Blinding Table entries
> + * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param add TRUE to add the entry, FALSE to delete it
> - * @param addr1 Destination address to blind or unblind
> + * @priv: A pointer to &struct lbs_private structure
> + * @add: TRUE to add the entry, FALSE to delete it
> + * @addr1: Destination address to blind or unblind
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1)
> {
> @@ -493,11 +514,11 @@ int lbs_mesh_bt_add_del(struct lbs_priva
> }
>
> /**
> - * @brief Reset/clear the mesh blinding table
> + * lbs_mesh_bt_reset - Reset/clear the mesh blinding table
> *
> - * @param priv A pointer to struct lbs_private structure
> + * @priv: A pointer to &struct lbs_private structure
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_mesh_bt_reset(struct lbs_private *priv)
> {
> @@ -517,17 +538,18 @@ int lbs_mesh_bt_reset(struct lbs_private
> }
>
> /**
> - * @brief Gets the inverted status of the mesh blinding table
> + * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh
> + * blinding table
> *
> - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> - * table, but an inverted table allows *only* traffic from nodes listed in
> - * the table.
> + * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> + * table, but an inverted table allows *only* traffic from nodes listed in
> + * the table.
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param invert On success, TRUE if the blinding table is inverted,
> - * FALSE if it is not inverted
> + * @priv: A pointer to &struct lbs_private structure
> + * @inverted: On success, TRUE if the blinding table is inverted,
> + * FALSE if it is not inverted
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted)
> {
> @@ -551,18 +573,19 @@ int lbs_mesh_bt_get_inverted(struct lbs_
> }
>
> /**
> - * @brief Sets the inverted status of the mesh blinding table
> + * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh
> + * blinding table
> *
> - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> - * table, but an inverted table allows *only* traffic from nodes listed in
> - * the table.
> + * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
> + * table, but an inverted table allows *only* traffic from nodes listed in
> + * the table.
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param invert TRUE to invert the blinding table (only traffic from
> - * listed nodes allowed), FALSE to return it
> - * to normal state (listed nodes ignored)
> + * @priv: A pointer to &struct lbs_private structure
> + * @inverted: TRUE to invert the blinding table (only traffic from
> + * listed nodes allowed), FALSE to return it
> + * to normal state (listed nodes ignored)
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted)
> {
> @@ -583,13 +606,13 @@ int lbs_mesh_bt_set_inverted(struct lbs_
> }
>
> /**
> - * @brief List an entry in the mesh blinding table
> + * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param id The ID of the entry to list
> - * @param addr1 MAC address associated with the table entry
> + * @priv: A pointer to &struct lbs_private structure
> + * @id: The ID of the entry to list
> + * @addr1: MAC address associated with the table entry
> *
> - * @return 0 on success, error on failure
> + * returns: 0 on success, error on failure
> */
> int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1)
> {
> @@ -614,14 +637,14 @@ int lbs_mesh_bt_get_entry(struct lbs_pri
> }
>
> /**
> - * @brief Access the mesh forwarding table
> + * lbs_cmd_fwt_access - Access the mesh forwarding table
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param cmd_action The forwarding table action to perform
> - * @param cmd The pre-filled FWT_ACCESS command
> + * @priv: A pointer to &struct lbs_private structure
> + * @cmd_action: The forwarding table action to perform
> + * @cmd: The pre-filled FWT_ACCESS command
> *
> - * @return 0 on success and 'cmd' will be filled with the
> - * firmware's response
> + * returns: 0 on success and 'cmd' will be filled with the
> + * firmware's response
> */
> int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action,
> struct cmd_ds_fwt_access *cmd)
> @@ -774,7 +797,10 @@ static int mesh_get_default_parameters(s
> }
>
> /**
> - * @brief Get function for sysfs attribute bootflag
> + * bootflag_get - Get function for sysfs attribute bootflag
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t bootflag_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -791,7 +817,11 @@ static ssize_t bootflag_get(struct devic
> }
>
> /**
> - * @brief Set function for sysfs attribute bootflag
> + * bootflag_set - Set function for sysfs attribute bootflag
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> @@ -817,7 +847,10 @@ static ssize_t bootflag_set(struct devic
> }
>
> /**
> - * @brief Get function for sysfs attribute boottime
> + * boottime_get - Get function for sysfs attribute boottime
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t boottime_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -834,7 +867,11 @@ static ssize_t boottime_get(struct devic
> }
>
> /**
> - * @brief Set function for sysfs attribute boottime
> + * boottime_set - Set function for sysfs attribute boottime
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t boottime_set(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> @@ -869,7 +906,10 @@ static ssize_t boottime_set(struct devic
> }
>
> /**
> - * @brief Get function for sysfs attribute channel
> + * channel_get - Get function for sysfs attribute channel
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t channel_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -886,7 +926,11 @@ static ssize_t channel_get(struct device
> }
>
> /**
> - * @brief Set function for sysfs attribute channel
> + * channel_set - Set function for sysfs attribute channel
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> @@ -912,7 +956,10 @@ static ssize_t channel_set(struct device
> }
>
> /**
> - * @brief Get function for sysfs attribute mesh_id
> + * mesh_id_get - Get function for sysfs attribute mesh_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
> char *buf)
> @@ -938,7 +985,11 @@ static ssize_t mesh_id_get(struct device
> }
>
> /**
> - * @brief Set function for sysfs attribute mesh_id
> + * mesh_id_set - Set function for sysfs attribute mesh_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> @@ -980,7 +1031,10 @@ static ssize_t mesh_id_set(struct device
> }
>
> /**
> - * @brief Get function for sysfs attribute protocol_id
> + * protocol_id_get - Get function for sysfs attribute protocol_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t protocol_id_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -997,7 +1051,11 @@ static ssize_t protocol_id_get(struct de
> }
>
> /**
> - * @brief Set function for sysfs attribute protocol_id
> + * protocol_id_set - Set function for sysfs attribute protocol_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t protocol_id_set(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> @@ -1034,7 +1092,10 @@ static ssize_t protocol_id_set(struct de
> }
>
> /**
> - * @brief Get function for sysfs attribute metric_id
> + * metric_id_get - Get function for sysfs attribute metric_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t metric_id_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -1051,7 +1112,11 @@ static ssize_t metric_id_get(struct devi
> }
>
> /**
> - * @brief Set function for sysfs attribute metric_id
> + * metric_id_set - Set function for sysfs attribute metric_id
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> @@ -1088,7 +1153,10 @@ static ssize_t metric_id_set(struct devi
> }
>
> /**
> - * @brief Get function for sysfs attribute capability
> + * capability_get - Get function for sysfs attribute capability
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer where data will be returned
> */
> static ssize_t capability_get(struct device *dev,
> struct device_attribute *attr, char *buf)
> @@ -1105,7 +1173,11 @@ static ssize_t capability_get(struct dev
> }
>
> /**
> - * @brief Set function for sysfs attribute capability
> + * capability_set - Set function for sysfs attribute capability
> + * @dev: the &struct device
> + * @attr: device attributes
> + * @buf: buffer that contains new attribute value
> + * @count: size of buffer
> */
> static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/rx.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/rx.c
> @@ -1,6 +1,6 @@
> -/**
> - * This file contains the handling of RX in wlan driver.
> - */
> +/*
> + * This file contains the handling of RX in wlan driver.
> + */
> #include <linux/etherdevice.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> @@ -40,12 +40,12 @@ static int process_rxed_802_11_packet(st
> struct sk_buff *skb);
>
> /**
> - * @brief This function processes received packet and forwards it
> - * to kernel/upper layer
> + * lbs_process_rxed_packet - processes received packet and forwards it
> + * to kernel/upper layer
> *
> - * @param priv A pointer to struct lbs_private
> - * @param skb A pointer to skb which includes the received packet
> - * @return 0 or -1
> + * @priv: A pointer to &struct lbs_private
> + * @skb: A pointer to skb which includes the received packet
> + * returns: 0 or -1
> */
> int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
> {
> @@ -156,11 +156,11 @@ done:
> EXPORT_SYMBOL_GPL(lbs_process_rxed_packet);
>
> /**
> - * @brief This function converts Tx/Rx rates from the Marvell WLAN format
> - * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
> + * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format
> + * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
> *
> - * @param rate Input rate
> - * @return Output Rate (0 if invalid)
> + * @rate: Input rate
> + * returns: Output Rate (0 if invalid)
> */
> static u8 convert_mv_rate_to_radiotap(u8 rate)
> {
> @@ -196,12 +196,12 @@ static u8 convert_mv_rate_to_radiotap(u8
> }
>
> /**
> - * @brief This function processes a received 802.11 packet and forwards it
> - * to kernel/upper layer
> + * process_rxed_802_11_packet - processes a received 802.11 packet and forwards
> + * it to kernel/upper layer
> *
> - * @param priv A pointer to struct lbs_private
> - * @param skb A pointer to skb which includes the received packet
> - * @return 0 or -1
> + * @priv: A pointer to &struct lbs_private
> + * @skb: A pointer to skb which includes the received packet
> + * returns: 0 or -1
> */
> static int process_rxed_802_11_packet(struct lbs_private *priv,
> struct sk_buff *skb)
> --- lnx-2639-rc4.orig/drivers/net/wireless/libertas/tx.c
> +++ lnx-2639-rc4/drivers/net/wireless/libertas/tx.c
> @@ -1,6 +1,6 @@
> -/**
> - * This file contains the handling of TX in wlan driver.
> - */
> +/*
> + * This file contains the handling of TX in wlan driver.
> + */
> #include <linux/netdevice.h>
> #include <linux/etherdevice.h>
> #include <linux/sched.h>
> @@ -13,11 +13,11 @@
> #include "dev.h"
>
> /**
> - * @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
> - * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
> + * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
> + * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
> *
> - * @param rate Input rate
> - * @return Output Rate (0 if invalid)
> + * @rate: Input rate
> + * returns: Output Rate (0 if invalid)
> */
> static u32 convert_radiotap_rate_to_mv(u8 rate)
> {
> @@ -51,12 +51,12 @@ static u32 convert_radiotap_rate_to_mv(u
> }
>
> /**
> - * @brief This function checks the conditions and sends packet to IF
> - * layer if everything is ok.
> + * lbs_hard_start_xmit - checks the conditions and sends packet to IF
> + * layer if everything is ok
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param skb A pointer to skb which includes TX packet
> - * @return 0 or -1
> + * @skb: A pointer to skb which includes TX packet
> + * @dev: A pointer to the &struct net_device
> + * returns: 0 or -1
> */
> netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
> {
> @@ -168,13 +168,13 @@ netdev_tx_t lbs_hard_start_xmit(struct s
> }
>
> /**
> - * @brief This function sends to the host the last transmitted packet,
> - * filling the radiotap headers with transmission information.
> + * lbs_send_tx_feedback - sends to the host the last transmitted packet,
> + * filling the radiotap headers with transmission information.
> *
> - * @param priv A pointer to struct lbs_private structure
> - * @param status A 32 bit value containing transmission status.
> + * @priv: A pointer to &struct lbs_private structure
> + * @try_count: A 32-bit value containing transmission retry status.
> *
> - * @returns void
> + * returns: void
> */
> void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
> {
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
More information about the libertas-dev
mailing list