Problem with Marvell SD8686 with Linux-2.6.29

[Ivan Li]

Hi Alberto,

Thanks for your reply.

Interface: SDIO
FW: 9.70.15p0

Below is the log when I insert the module:
root at onyx ~$ modprobe libertas_sdio
lib80211: common routines for IEEE802.11 drivers
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
libertas_sdio mmc1:0001:1: firmware: requesting sd8686_helper.bin
libertas_sdio mmc1:0001:1: firmware: requesting sd8686.bin
libertas: 00:27:13:e2:bd:30, fw 9.70.15p0, cap 0x00000303
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: eth0: Marvell WLAN 802.11 adapter

----- Original Message ----- 
From: "Alberto Panizzo" <maramaopercheseimorto at gmail.com>
To: "Marek Vasut" <marek.vasut at gmail.com>
Cc: "Ivan Li" <lijinlei1 at 163.com>; <libertas-dev at lists.infradead.org>
Sent: Monday, October 11, 2010 4:26 PM
Subject: Re: Problem with Marvell SD8686 with Linux-2.6.29


> On sab, 2010-10-09 at 12:16 +0200, Marek Vasut wrote:
>> Dne So 9. října 2010 10:32:52 Ivan Li napsal(a):
>> > Hi guys,
>> > 
>> > I am using Marvell sd8686 on Marvell pxa168 platform.
>> > I can't associate with AP, but I can get AP list with "iwlist eth0 scan".
>> > 
>> > detailed log lists below.
>> > 
>> > Working env:
>> > 1. Linux-2.6.29
>> > 2. Marvell pxa168 with sd8686
>> > 
>> > And I remember I successfully get marvell sd8686 work on Freescale i.MX31
>> > with Linux-2.6.29.
>> 
>> Hi, such kernel is way too outdated. The Marvell pxa168 is well supported in 
>> mainline linux kernel ... can you try that ?
>> 
>> Cheers
> 
> Anyway, your log seems to tell about misconfiguration of the interface 
> CPU/Wifi chip because of too many timeouts.
> Are you sure about pin configurations? (function/Signal strength).
> 
> You didn't tell us what interface are you using and what firmware
> version you are loading.
> 
> Cheers
> Alberto!
> 
>> 
>> > 
>> > root at onyx ~$ wpa_supplicant -Dwext -ieth0 -c/etc/wpa.conf
>> > CTRL-EVENT-SCAN-RESULTS
>> > Trying to associate with 00:22:b0:9b:2d:ad (SSID='tiger' freq=2437 MHz)
>> > Association request to the driver failed
>> > Associated with 00:22:b0:9b:2d:ad
>> > Authentication with 00:22:b0:9b:2d:ad timed out.
>> > ioctl[SIOCSIWMLME]: Operation not supported
>> > libertas: command 0x0006 timed out
>> > libertas: requeueing command 0x0006 due to timeout (#1)
>> > WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>> > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> > libertas: command 0x0006 timed out
>> > libertas: requeueing command 0x0006 due to timeout (#2)
>> > libertas: Invalid CMD_RESP 6 to command 6!
>> > Authentication with 00:00:00:00:00:00 timed out.
>> > libertas: command 0x0006 timed out
>> > libertas: requeueing command 0x0006 due to timeout (#3)
>> > libertas: Invalid CMD_RESP 6 to command 6!
>> > libertas: command 0x0006 timed out
>> > libertas: Excessive timeouts submitting command 0x0006
>> > libertas: PREP_CMD: command 0x0006 failed: -110
>> > libertas: SCAN_CMD failed
>> > libertas: Received CMD_RESP with invalid sequence 34 (expected 35)
>> > libertas: command 0x0013 timed out
>> > libertas: requeueing command 0x0013 due to timeout (#1)
>> > libertas: Received result 0 to command 13 after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 35 (expected 36)
>> > libertas: command 0x0028 timed out
>> > libertas: requeueing command 0x0028 due to timeout (#1)
>> > libertas: Received result 0 to command 28 after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 36 (expected 37)
>> > libertas: command 0x0028 timed out
>> > libertas: requeueing command 0x0028 due to timeout (#1)
>> > libertas: Received result 0 to command 28 after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 37 (expected 38)
>> > libertas: command 0x002f timed out
>> > libertas: requeueing command 0x002f due to timeout (#1)
>> > libertas: Received result 0 to command 2f after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 38 (expected 39)
>> > libertas: command 0x005e timed out
>> > libertas: requeueing command 0x005e due to timeout (#1)
>> > libertas: Received result 0 to command 5e after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 39 (expected 40)
>> > libertas: command 0x005e timed out
>> > libertas: requeueing command 0x005e due to timeout (#1)
>> > libertas: Received result 0 to command 5e after 1 retries
>> > libertas: Received CMD_RESP with invalid sequence 40 (expected 41)
>> > CTRL-EVENT-SCAN-RESULTS
>> > _______________________________________________
>> > libertas-dev mailing list
>> > libertas-dev at lists.infradead.org
>> > http://lists.infradead.org/mailman/listinfo/libertas-dev
>> 
>> _______________________________________________
>> libertas-dev mailing list
>> libertas-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/libertas-dev
> 
> 
> 
> _______________________________________________
> libertas-dev mailing list
> libertas-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev
>