libertas: DAT1 signal IRQ in 1-bit SDIO mode

[Daniel Mack]

On Tue, Mar 30, 2010 at 12:54:42AM +0530, Alagu Sankar wrote:
>    If this is too much try for now and would like to still continue with the
>    1-bit mode, you can try setting the ECSI bit in CCCR - Bus Interface
>    Control Register (This should be done inside the libertas driver once
>    during the initialization).  This has helped us running the card in 1-bit
>    mode and get SDIO interrupts as well.

Great, that did the trick. Thanks a lot for this information :)

Daniel