Libertas with if_spi on pxa270

[Mike Rapoport]

Uli Luckas wrote:
> On Tuesday, 27. January 2009, Mike Rapoport wrote:
>> Dan,
>>
>>
> Does that mean, you got it working on PXA? Mine won't work.
> On pxa270, kernel 2.6.27.3 + "gspi patch" + "16bit/word spi mode" I get the 
> following log:
> 
> Jan 26 19:39:44 [kernel] [  242.422220] libertas_spi: Libertas SPI driver
> Jan 26 19:39:44 [kernel] [  242.425066] firmware: requesting 
> libertas/gspi8686_hlp.bin
> Jan 26 19:39:45 [kernel] [  243.089646] firmware: requesting 
> libertas/gspi8686.bin
> Jan 26 19:39:49 [kernel] [  247.049868] libertas: command 0x0003 timed out
> Jan 26 19:39:49 [kernel] [  247.049937] libertas: requeueing command 0x0003 
> due to timeout (#1)
> Jan 26 19:39:49 [kernel] [  247.051820] libertas: Received result 0 to command 
> 3 after 1 retries
> Jan 26 19:39:49 [kernel] [  247.051989] libertas: 00:15:af:3a:8a:9a, fw 
> 9.70.10p0, cap 0x00000303
> Jan 26 19:39:49 [kernel] [  247.057863] libertas: Received CMD_RESP with 
> invalid sequence 1 (expected 2)
> Jan 26 19:39:52 [kernel] [  250.049932] libertas: command 0x0028 timed out
> Jan 26 19:39:52 [kernel] [  250.050016] libertas: requeueing command 0x0028 
> due to timeout (#1)
> Jan 26 19:39:52 [kernel] [  250.051814] libertas: Received result 0 to command 
> 28 after 1 retries
> Jan 26 19:39:52 [kernel] [  250.053530] libertas: Received CMD_RESP with 
> invalid sequence 2 (expected 3)
> Jan 26 19:39:55 [kernel] [  253.049850] libertas: command 0x001d timed out
> Jan 26 19:39:55 [kernel] [  253.049919] libertas: requeueing command 0x001d 
> due to timeout (#1)
> Jan 26 19:39:55 [kernel] [  253.051795] libertas: Received result 0 to command 
> 1d after 1 retries
> Jan 26 19:39:55 [kernel] [  253.053982] libertas: Received CMD_RESP with 
> invalid sequence 3 (expected 4)
> Jan 26 19:39:58 [kernel] [  256.049914] libertas: command 0x00a3 timed out
> Jan 26 19:39:58 [kernel] [  256.050000] libertas: requeueing command 0x00a3 
> due to timeout (#1)
> Jan 26 19:39:58 [kernel] [  256.052128] libertas: Received result 2 to command 
> a3 after 1 retries
> Jan 26 19:39:58 [kernel] [  256.052278] libertas: PREP_CMD: command 0x00a3 
> failed: 2
> Jan 26 19:39:58 [kernel] [  256.054505] libertas: Received CMD_RESP with 
> invalid sequence 4 (expected 5)
> Jan 26 19:40:01 [kernel] [  259.049833] libertas: command 0x00a3 timed out
> Jan 26 19:40:01 [kernel] [  259.049901] libertas: requeueing command 0x00a3 
> due to timeout (#1)
> Jan 26 19:40:01 [kernel] [  259.052018] libertas: Received result 2 to command 
> a3 after 1 retries
> Jan 26 19:40:01 [kernel] [  259.052146] libertas: PREP_CMD: command 0x00a3 
> failed: 2
> Jan 26 19:40:01 [kernel] [  259.052205] libertas: eth0: Marvell WLAN 802.11 
> adapter

> Any idea what could be going wrong here?