Libertas with if_spi on pxa270

[Dan Williams]

On Mon, 2009-01-26 at 18:24 +0200, Mike Rapoport wrote:
> 
> Dan Williams wrote:
> > On Mon, 2009-01-26 at 16:58 +0200, Mike Rapoport wrote:
> >> Hi,
> >>
> >> Have anybody tried to use 8686 with G-SPI on PXA270?
> >> I've merged libertas-related changes from wireless-testing tree on top of
> >> 2.6.29-rc2, added a "libertas_spi" device to my platform code, but all I could
> >> get from the if_spi was "libertas: Can't read bus mode register." :(
> > 
> > Have you set up the Chip Select stuff correctly for your board (see
> > gpio_cs in the platform data)?  That seems to be board-dependent and
> > there's not a good generic way of doing this in the current kernel
> > sources.
> > 
> > That error is the first error that will get reported when the driver
> > actually tries to talk to the card, which requires that the Chip Select
> > stuff be set up correctly.  If you think you've got that already set up,
> > can you manually inspect whether or not the libertas device has actually
> > been selected on the board?
> 
> The first thing I've done was to recheck GPIO setup and platform_data for all
> SPI related stuff.
> I've even inserted GPIO setup function at the very beginning of if_spi_probe.
> The Marvell proprietary driver works well on the same board and exactly same
> GPIOs setup.

Ok, Colin McCabe will probably need to get involved here then since he
wrote those bits :)

Dan