Libertas driver problem with WPA

[Jacky Lam]

Dear Dan,

	The problem is gone when I upgrade my wpa_supplicant to 0.6.9. If there
is some way to tell the in-compatibility of driver and userland tools,
it will be much better.

	Anyway, thanks for your reply.

Best Regards,
Jacky

Dan Williams 提到:
> On Mon, 2009-12-07 at 11:12 +0800, Jacky Lam wrote:
>> Dear all,
>>
>> 	I have problem to associate with AP using WPA-PSK using Libertas driver
>> on SD8686 chip set, but no problem with WEP.
>
> What kernel version?  Also you shouldn't need to patch wpa_supplicant to
> work with the Marvell driver.  Using the upstream kernel libertas driver
> is supported with the generic wpa_supplicant "wext" driver, and I know
> that driver works for WPA-PSK connections.
>
> Dan
>
>> 	I use wpa_supplicant-0.5.7 patched to work with Marvel's driver(which
>> is proven to work on our another platform using Marvell's SDIO driver
>> and Linux 2.4.20 kernel.) The following is the wpa_supplicant.conf:
>>
>> ctrl_interface=/tmp/run/wpa_supplicant
>> ctrl_interface_group=0
>> eapol_version=1
>> ap_scan=1
>> fast_reauth=1
>> network={
>> ssid="WL_TEST"
>> proto=WPA RSN
>> key_mgmt=WPA-PSK
>> pairwise=CCMP TKIP
>> group=CCMP TKIP
>> psk="hellohello"
>> }
>>
>> 	Is there any changes on the way to connect WPA-PSK AP when transit from
>> Linux 2.4 to 2.6 or Marvell's driver to Libertas driver?
>>
>> 	Please help to give me some advice. Thanks.
>>
>> BR,
>> Jacky
>>
>> _______________________________________________
>> libertas-dev mailing list
>> libertas-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/libertas-dev
>
>
>