Identify mystery libertas firmware?
Bill Gribble
grib at billgribble.com
Thu Oct 16 12:33:36 EDT 2008
On Tue, 2008-10-14 at 11:08 -0400, Dan Williams wrote:
> On Tue, 2008-10-14 at 10:26 -0400, Bill Gribble wrote:
> > I came across a firmware file on my hard drive that was different than
> > the ones I had been trying on my Raon Everun (SD8686 internal), and
> > plopped it into /lib/firmware to see what happened.
> >
> > Imagine my surprise when it worked! Under kernel 2.6.27, I get an eth0
> > device and can join and use WPA networks with no problems.
> >
> > Unfortunately I don't know where this particular firmware file came
> > from. Can anyone in libertas-land identify it based on its md5sum?
>
> What does the driver print out in the kernel logs when you load the part
> with this firmware? It should print out the firmware version in the
> first few lines after the card is inserted.
Ah, ok. Found it:
libertas: 00:19:88:xx:xx:xx, fw 8.73.7p3, cap 0x00000393
Works great, I see a few messages like this in the logs:
libertas: PREP_CMD: command 0x00a3 failed: 2
but they don't appear to do any harm.
Thanks,
Bill Gribble
More information about the libertas-dev
mailing list