Scanning problem for hidden SSIDs

[prabhakar]

Hi Holger, Dan,

I am using the same code as you mentioned.

My problem is,

Host driver is not getting any AP details when it sends scan command. If i 
check the log of firmware by sending HostCmd_CMD_802_11_GET_LOG command to 
firmware, it shows no rx frames received and tx frames count is not zero . 
but i could see the probe responses from the APs. Please give me some idea 
about this problem.


Thanks & Regards,
Prabhakar.

---------- Original Message -----------
From: Holger Schurig <hs4233 at mail.mn-solutions.de>
To: libertas-dev at lists.infradead.org
Sent: Fri, 22 Jun 2007 22:23:23 +0200
Subject: Re: Scanning problem for hidden SSIDs

> > I just don't know how I can tell the firmware to send such a data
> > packet. I think it is one of the bits in the txpd.powermgmt (page 24
> > of the manual), but which one?
> 
> Ahh, Marvell just allowed the Gumstix people to released the 5.0.16
> driver as GPL to the general community. The driver is at
> http://files.gumstix.com/cf8385-5.0.16.p0-26306.tbz
> 
> There, in wlan_tx.c is a function SendNullPacket(wlan_private *priv, 
> u8 pwr_mgmt) that I could use for this purpose.
> 
> _______________________________________________
> libertas-dev mailing list
> libertas-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev
------- End of Original Message -------