[PATCH] remove SUPPORT_BOOT_COMMAND

[Holger Schurig]

Remove the static definition of SUPPORT_BOOT_COMMAND.

Signed-off-by: Holger Schurig <hs4233 at mail.mn-solutions.de>

---

This makes the makefile simpler for the split into libertas.ko and usb8xxx.ko.
Another option would be to put a #define SUPPORT_BOOT_COMMAND into if_usb.h.

--- libertas-2.6.orig/drivers/net/wireless/libertas/Makefile
+++ libertas-2.6/drivers/net/wireless/libertas/Makefile
@@ -13,7 +13,6 @@
 
 
 # This is needed to support the newer boot2 bootloader (v >= 3104)
-EXTRA_CFLAGS += -DSUPPORT_BOOT_COMMAND
 usb8xxx-objs += if_bootcmd.o
 usb8xxx-objs += if_usb.o 
 
--- libertas-2.6.orig/drivers/net/wireless/libertas/if_usb.h
+++ libertas-2.6/drivers/net/wireless/libertas/if_usb.h
@@ -12,7 +12,6 @@
 #define USB8388_VID_2	0x05a3
 #define USB8388_PID_2	0x8388
 
-#ifdef SUPPORT_BOOT_COMMAND
 #define BOOT_CMD_FW_BY_USB     0x01
 #define BOOT_CMD_FW_IN_EEPROM  0x02
 #define BOOT_CMD_UPDATE_BOOT2  0x03
@@ -36,7 +35,6 @@
 	u8  u8result;
 	u8  au8dumy[2];
 };
-#endif /* SUPPORT_BOOT_COMMAND */
 
 /* read callback private data */
 struct read_cb_info {
--- libertas-2.6.orig/drivers/net/wireless/libertas/if_usb.c
+++ libertas-2.6/drivers/net/wireless/libertas/if_usb.c
@@ -775,7 +775,6 @@
 		return -1;
 	}
 
-#ifdef SUPPORT_BOOT_COMMAND
 	cardp->bootcmdresp = 0;
 	do {
 		int j = 0;
@@ -796,7 +795,6 @@
 		}
 		return -1;
 	}
-#endif
 
 	i = 0;
 	priv->adapter->fw_ready = 0;