writing to mac,bbp or rf registers not supported?

[Ronak Chokshi]

I don't think we need to worry about the CMD_CFREGR related command.
This is related to the compact flash interface which is unrelated in
this project. 

If you only wanted to test the wlanconfig tool and it works fine for you
then you don't need my help to give you any registers.

Wlanconfig utility covers a lot of commands. But from the past
correspondences, I think you have probably covered all the useful ones.
In that case, I think it is safe to kill the wlanconfig utility if you
so desire.

Thanks
Ronak
-----Original Message-----
From: Marcelo Tosatti [mailto:marcelo at kvack.org] 
Sent: Saturday, December 02, 2006 12:10 PM
To: Ronak Chokshi
Cc: Marcelo Tosatti; Alan Cunningham; libertas-dev at lists.infradead.org
Subject: Re: writing to mac,bbp or rf registers not supported?


Ronak,

On Fri, Dec 01, 2006 at 05:54:24PM -0800, Ronak Chokshi wrote:
> Marcelo,
> Thanks for the additional info. Yes, the entire MAC, BBP and RF
register
> map are not writeable. I guess I am still confused as to what exactly
> you are trying to accomplish through writing different values in these
> registers. If you would just like to test whether the utility is
working
> or not, 

Just testing the utility, which is working. 

BTW, the wlanconfig tool has support for accessing other registers such
as CMD_CFREGR, but docs dont mention firmware commands for it:

5.3 Register and Memory Access 
    5.3.1 CMD_BBP_REG_ACCESS Command
    5.3.2 CMD_RF_REG_ACCESS Command 
    5.3.3 CMD_MAC_REG_ACCESS Command

> I can give you a set of registers that you could use for this.

What registers? Do we need to implement access to any other registers in
the interface?

On the same topic, are you OK with removal of wlanconfig, or is still
there anything useful it provides?

Thanks